Catalog FORMAT Plus- 2017 - 2018

Countersink tools 130

Plastic cassette, empty

Design: Robust, high quality cassette with automatic drill setup function when opened.

1440

Size mm

Order No. 0001 0002

Cutting Tools 1

6.3–20.5 6.3–25.0

12.20 12.85 (W134)

90° countersinks and deburring countersinks sets with cylinder Shank

Design: DIN 335-C. 90° countersink angle. Axial and radial taper-ground and CBN deep-ground. With straight, u-shaped clamping slots and drilling spaces ground from full pieces. Also provided with cutting and clearance angles for the most common materials. Supplied in a robust, high quality plastic cassette with automatic countersink setup function when opened. Note: Sufficient supply of coolant is essential for uncoated designs. Other set arrangements available on request.

DIN 335-C

Z 3

90°

1440 Bright 1442 TiN 1443 TiAlN 1444

HSS, bright surface Set consisting of (order no. 1430).

HSS, TiN coated surface Set consisting of (order no. 1433).

HSS, TiAIN coated surface Set consisting of (order no. 1434).

HSS-Co5, bright surface Set consisting of (order no. 1436).

Bright

1444

1440

1442 TiN

1443

HSS Co5

HSS

HSS

HSS

bright

TiAlN

bright

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1440 1442 1443 1444

C C C C

C C C C

V V C V

V V V C

C C V V

C C C V

V V C

V V C

V

1440

1442

1443

1444

Set contents

Order No.

mm

bright

TiN

TiAlN

bright

0010 0005

6.3; 10.4; 16.5; 20.5; 25.0 6.3; 8.3, 10.4; 12.4; 16.5; 20.5

73.20 53.20 (W134)

107.50 101.50 (W134)

128.50 123.50 (W134)

80.90 80.90 (W134)

1/112

Made with FlippingBook flipbook maker