Catalog FORMAT Plus- 2017 - 2018

Countersink tools 137

90° countersinks and deburring countersinks with morse taper shank

Design: HSS, DIN 335-D, 90° countersink angle. Axial and radial taper-ground and CBN deep-ground. With straight clamping slots and drilling spaces ground from full pieces. Also provided with cutting and clearance angles for the most common materials. Application: Suitable for universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DIN 965, DIN 966 and DIN 7991 in one step. Please note the large countersink range! The excellent cutting properties and easy machining process result from the cone-shaped back taper on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed. Note: Sufficient supply of coolant is essential for uncoated designs. Same performance and quality features as 1430 or 1433, but with morse taper shank.

DIN 335-D

Z 3

HSS

MK 1–4

90°

Cutting Tools 1

1450

bright

1453 TiN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1450 1453

C C

V C

V V

C C

V

V

V

C

1450

1453

1450

1453

Nominal ∅

Nominal ∅

Order No.

Total length mm

Shank MK

Order No.

Total length mm

Shank MK

Smallest ∅

Smallest ∅

mm

mm

mm 3.2 3.2 3.5 3.8 3.8 3.8 4.2 4.2

mm

bright

TiN

bright

TiN

1500 1650 2050 2300 2500 2600 3000 3100

15.0 34.90

85 1 85 1 100 2 106 2 106 2 106 2 112 2 112 2

3400 3700 4000 4500 5000 6300 8000

34.0 47.30 63.10 37.0 54.50 90.40 40.0 68.90 90.40 50.0 85.70 135.50 63.0 140.50 218.00 80.0 161.50 250.50 45.0 86.60 –

4.5 118 2 4.8 118 2 10.0 140 3 12.0 145 3 14.0 150 3 16.0 180 4 22.0 190 4

16.5 34.30 43.70 20.5 39.60 50.50

23.0 40.60

25.0 40.60 48.10

26.0 46.00

30.0 46.00 58.60 31.0 47.30 63.10

(W134)

(W134)

(W134)

(W134)

60° countersinks and deburring countersinks with cylinder Shank

Design: HSS, DIN 335-C. 60° countersink angle. Axial and radial taper-ground. With straight, u-shaped clamping slots and drilling spaces ground from full pieces. Also provided with cutting and clearance angles for the most common materials. Application: Suitable for universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DIN 965, DIN 966 and DIN 7991 in one step. Please note the large countersink range! The excellent cutting properties and easy machining process result from the cone-shaped back taper on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed. Note: Sufficient supply of coolant is essential for uncoated designs.

DIN 334-C

Z 3

HSS

60°

1456

bright

1459 TiN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1456 1459

C C

V C

V V

C C

V

V

V

C

1456

1459

1456

1459

Nominal ∅ mm

Nominal ∅ mm

Order No.

Total length mm

Shank ∅

Order No.

Total length mm

Shank ∅

Smallest ∅

Smallest ∅

mm 1.7 2.1 2.6 3.3 4.1

mm

mm 5.1 6.4

mm

bright

TiN

bright

TiN

0630 0800 1000 1250 1600

6.3 8.0 10.0

7.55 12.45 7.85 13.00 9.60 16.15

45 5 50 6 53 6 56 8 63 10

2000 2500 3150 4000

20.0 17.60 29.10 25.0 24.30 38.80 31.5 40.60 60.60 40.0 66.70 94.70

67 10 71 10

10.01 76 12 10.01 91 15

12.5 10.15 17.50 16.0 12.65 21.40

(W134)

(W134)

(W134)

(W134)

1/119

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Made with FlippingBook flipbook maker