Catalog FORMAT Plus- 2017 - 2018

Reamers 165

Carbide machine reamer

Design: Solid carbide up to nominal ∅ 9.0 mm, carbide (K10) from nominal ∅ 10.0 mm DIN 8093, with approx. 7° left spirals, with long cutting section, short point and uneven tooth pitch. This achieves clean and exact drilling. With cylinder shank Tolerance h7. Bright surface. Application: For reaming through-holes and also suitable for reaming blind holes due to the short point. Particularly suitable for high alloy and annealed steels up to 52 HRC, casting materials and soft non-ferrous metals such as aluminium and brass.

DIN 8093

H7

Carbide

approx. 7°

Cutting Tools 1

bright

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1546

C

C

C

C

V

C

C

C

C

C

1546

1546

Nominal ∅

Nominal ∅

Order No.

Cutting length mm

Total length mm

Shank ∅ h9 mm

Order No.

Cutting length mm

Total length mm

Shank ∅ h9 mm

mm

mm

bright

bright

0100 0120 0140 0150 0180 0200 0220 0250 0280 0300 0320

1.0 1.2 1.4 1.5 1.8 2.0 2.2 2.5 2.8 3.0 3.2

25.50 27.00 27.00 22.80 32.30 26.40 34.40 30.40 35.50 31.30 36.80 (W146)

5.5 7.5 8.0 8.0 9.0 11.0 12.0 14.0 15.0 15.0 16.0

34 38 40 40 46 49 53 57 61 61 65

1.0 1.2 1.4 1.5 1.8 2.0 2.2 2.5 2.8 3.0 3.2

0350 0400 0450 0500 0600 0700 0800 0900 1000 1100 1200

3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0

35.00 36.10 42.40 43.60 52.90 63.30 66.90 76.10 54.60 68.10 62.60 (W146)

18.0 19.0 21.0 23.0 26.0 31.0 33.0 36.0 38.0 41.0 44.0

70 75 80 86 93 109 117 125 133 142 151

3.5 4.0 4.5 5.0 5.6 7.1 8.0 9.0 10.0 10.0 10.0

10.0* 11.0* 12.0*

*According to factory standard.

Carbide machine reamer

Design: Carbide (K10) DIN 8094, with approx. 7° left spirals, with long cutting section, short point and uneven tooth pitch.

DIN 8094

H7

Carbide

This achieves clean and exact drilling. With morse taper shank Bright surface.

MK 1–3

approx. 7°

Application: For reaming through-holes and also suitable for reaming blind holes due to the short point. Particularly suitable for high alloy and annealed steels up to 52 HRC, casting materials and soft non-ferrous metals such as aluminium and brass.

bright

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1549

C

C

C

C

C

C

C

C

C

1549

1549

Nominal ∅

Nominal ∅

Order No.

Cutting length mm

Total length mm

MK

Order No.

Cutting length mm

Total length mm

MK

mm

mm

bright

bright

1000 1100 1200 1300 1400 1500 1600 1700 1800

10 11 12 13 14 15 16 17 18

66.90 71.90 67.50 73.00 78.50 86.40 89.50 98.00 91.90 (W146)

38 41 44 44 47 50 52 54 56

168 175 182 182 189 204 210 214 219

1 1 1 1 1 2 2 2 2

1900 2000 2200 2400 2500 2600 2800 3000

19 20 22 24 25 26 28 30

109.50 102.50 117.50 146.00 146.00 161.00 202.50 189.50 (W146)

58 60 64 68 68 70 71 73

223 228 237 268 268 273 277 281

2 2 2 3 3 3 3 3

1/147

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Made with FlippingBook flipbook maker