Catalog FORMAT Plus- 2017 - 2018

Drilling tools

31

Short drill with cylinder Shank

Design: HSSE-PM, DIN 1897, type GT 500 DZ. Profile grinding, TiN-coated surface, right cutting, with precise point geometry and excellent thermal resistance. With special point thinning. Angle of rake normal, normal core thickness and no core gradient. HSSE-PM is characterised by its high toughness (higher edge strength, wear-resistant) and a longer tool life. Application: Durable and break-proof short drill made from PM steel for machining high-alloy steels, tempered and case-hardeing steels, cast iron, brass and bronze.

Type GT 500DZ

HSS-E PM

DIN 1897

130°

25–30°

Cutting Tools 1

TiN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1066

18

15

45

40

25

15

40

&DVWLURQ PDWHULDOV f mm/rev

&DVWLURQ PDWHULDOV f mm/rev

1066

1066

∅ h8

∅ h8

Order No.

PU

Order No.

PU

Spiral length mm

Total length mm

Spiral length mm

Total length mm

mm

mm

TiN

TiN

0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0320 0330 0340 0350 0360 0370 0380 0390 0400 0410 0420 0430 0440 0450 0460 0470 0480 0490 0500 0510 0520 0530 0540 0550

1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5

8.50 8.40 8.60 9.10 8.40 8.05 8.20 8.30 8.40 8.30 6.85 7.65 8.40 8.40 8.80 7.45 8.80 8.30 9.10 8.05 7.65 8.05 8.60 8.80 7.85 8.40 6.85 7.45 8.40 9.50 7.75 9.00 8.05 8.90 9.50 7.85

10 7 28 10 8 30 10 8 30 10 9 32 10 9 32 10 10 34 10 10 34 10 11 36 10 11 36 10 12 38 10 12 38 10 13 40 10 13 40 10 14 43 10 14 43 10 14 43 10 16 46 10 16 46 10 16 46 10 16 46 10 18 49 10 18 49 10 18 49 10 20 52 10 20 52 10 20 52 10 20 52 10 22 55 10 22 55 10 22 55 10 22 55 10 22 55 10 24 58 10 24 58 10 24 58 10 24 58 10 24 58 10 26 62 10 26 62 10 26 62 10 26 62 10 26 62 10 26 62 10 28 66 10 28 66 10 28 66

0.018 0.063 0.063 0.063 0.063 0.063 0.063 0.063 0.063 0.063 0.063 0.080 0.080 0.080 0.080 0.080 0.100 0.100 0.100 0.100 0.100 0.100 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.160 0.160 0.160 0.160 0.160

0560 0570 0580 0590 0600 0610 0620 0630 0640 0650 0660 0670 0680 0690 0700 0710 0720 0730 0740 0750 0760 0770 0780 0790 0800 0810 0820 0830 0840 0850 0880 0900 0930 0950 0980 1000 1020 1050 1100 1150 1200 1250 1300 1350 1400

5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.8 9.0 9.3 9.5 9.8

11.05 11.80 12.10 11.80 11.70 11.70 12.30 12.20 10.25 12.95 13.25 12.00 13.95 15.65 17.30 17.10 17.10 17.20 16.45 18.10 18.30 15.65 18.10 17.10 21.70 22.30 22.80 22.80 19.15 26.40 20.70 31.60 24.80 27.40 23.80 35.70 34.20 34.20 36.20 41.90 45.50 45.50 48.10 60.00 (W115) 9.85

10 28 66 0.160 10 28 66 0.160 10 28 66 0.160 10 28 66 0.160 10 31 70 0.160 5 31 70 0.160 5 31 70 0.160 5 31 70 0.160 5 31 70 0.200 5 31 70 0.200 5 31 70 0.200 5 34 74 0.200 5 34 74 0.200 5 34 74 0.200 5 34 74 0.200 5 34 74 0.200 5 34 74 0.200 5 34 74 0.200 5 37 79 0.200 5 37 79 0.200 5 37 79 0.200 5 37 79 0.200 5 37 79 0.200 5 37 79 0.200 5 37 79 0.250 5 37 79 0.250 5 37 79 0.250 5 37 79 0.250 5 40 84 0.250 5 40 84 0.250 5 40 84 0.250 5 40 84 0.250 5 43 89 0.250 5 43 89 0.250 5 43 89 0.250 5 43 89 0.250 5 47 95 0.250 1 47 95 0.250 1 51 102 0.250 1 51 102 0.250 1 51 102 0.250 1 54 107 0.315 1 54 107 0.315 1 54 107 0.315 5 34 74 0.200

10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0

10.15

9.50

10.25 10.35

8.80 9.00

10.55 10.15 10.85

9.30

(W115)

1/13

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Made with FlippingBook flipbook maker