Catalog FORMAT Plus- 2017 - 2018

Drilling tools

53

Spiral drill set with cyl. Shank

Design: Supplied in a robust, high quality plastic cassette with automatic drill setup function when opened.

HSS Co5

DIN 338

Type INOX

130°

35°

1033 Bright 1026

Note: Set consisting of (Order No. 1025).

Cutting Tools 1

Note: Set consisting of (Order No. 1026).

Bright

1026

1033

bright

bright

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1033 1026

18 18

90 90

60 60

10 10

1033

1026

Set contents ∅ h8 mm

Order No.

Number of drills Piece

Increasing

mm 0.5

bright

bright

0005 0007 0009

1.0–10.0 1.0–10.5 1.0–13.0

144.50 207.00 326.00 (W100)

19 24 25

389.00 641.00 (W105)

0.5 + K.B.*

0.5

* With intermediate sizes for tapped holes: 1 piece each ∅ 3.3; 4.2; 6.8; 10.2 mm.

Spiral drill with cyl. Shank

Design: HSS-E PM, DIN 338, type GT 500 DZ. TiN coated surface, right cutting, with special point geometry and ratio point thinning. Normal angle of rake, core thickness thicker than normal and without core gradient. The drill has a very good self- centring behaviour and produces short chips, even from long-chipping materials. Sturdy, powerful model, profile grinding, right cutting, with precise point geometry as well as special point thinning and excellent thermal resistance. Normal core gradient. Application: Suitable for short drilling depths up to 5 x D. Suitable for construction and carbon steels, high alloy steels, tool steels, castings and casting alloys, magnesium alloys, non-ferrous metals and plastics.

Type GT 500DZ

HSS-E PM

DIN 338

5xD

130°

38°

TiN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1021

18

15

45

40

25

15

6WHHOV XSWR

6WHHOV XSWR

1021

1021

∅ h8

∅ h8

Order No.

PU

Order No.

PU

Spiral length mm

Total length mm

Spiral length mm

Total length mm

1PP

1PP

f mm/rev

f mm/rev

mm

mm

TiN

TiN

0100 0110 0120 0130 0140 0150 0160 0170 0180

1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8

9.30 9.20 9.40 9.20 8.90 9.00 9.10 9.00 10.05 (W115)

10 12 10 14 10 16 10 16 10 18 10 18 10 20 10 20 10 22

34 0.012 36 0.032 38 0.032 38 0.032 40 0.032 40 0.032 43 0.032 43 0.032 46 0.032

0190 0200 0210 0220 0230 0240 0250 0260 0270

1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7

9.10 7.65 8.40 9.20 9.20 9.50 8.30

10 22 10 24 10 24 10 27 10 27 10 30 10 30 10 30 10 33

46 0.032 49 0.032 49 0.040 53 0.040 53 0.040 57 0.040 57 0.040 57 0.050 61 0.050

10.15

9.40

Continued overleaf

(W115)

1/35

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Made with FlippingBook flipbook maker