Catalog FORMAT Plus- 2017 - 2018

Drilling tools

55

Design: HSS, DIN 340, type N. Right cutting, with precise point geometry, rolled. Robust design. Hole depth 5 x D. Application: Cost-effective design for hand guided machines. Spiral drill with cyl. Shank, rolled, long

DIN 340

Type N

HSS

118°

25–30°

Cutting Tools 1

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1048

18

18

6WHHOV XSWR

6WHHOV XSWR

1048

1048

∅ h8

∅ h8

Order No.

PU

Order No.

PU

Spiral length mm

Total length mm

Spiral length mm

Total length mm

1PP

1PP

f mm/rev

f mm/rev

mm

mm

0100 0150 0200 0250 0300 0310 0320 0330 0350 0400 0410 0420 0450 0500 0510 0520 0550 0580

1.0 1.5 2.0 2.5 3.0 3.1 3.2 3.3 3.5 4.0 4.1 4.2 4.5 5.0 5.1 5.2 5.5 5.8

0.32 0.32 0.32 0.40 0.48 0.56 0.56 0.56 0.56 0.76 0.92 0.92 0.92 1.16 1.28 1.28 1.28 1.44

10 33 10 45 10 56 10 62 10 66 10 69 10 69 10 69 10 73 10 78 10 78 10 78 10 82 10 87 10 87 10 87 10 91 10 91

56 0.016 70 0.050 85 0.050 95 0.063 100 0.080 106 0.080 106 0.100 106 0.100 112 0.100 119 0.100 119 0.100 119 0.100 126 0.100 132 0.100 132 0.125 132 0.125 139 0.125 139 0.125

0600 0650 0680 0700 0750 0800 0850 0900 0950 1000 1020 1050 1100 1150 1200 1250 1300

6.0 6.5 6.8 7.0 7.5 8.0 8.5 9.0 9.5

1.44 1.56 1.64 1.64 1.80 2.00 2.20 2.40 2.68 3.20 3.60 3.60 4.00 4.36 5.00 5.45 5.70

10 91 139 0.125 10 97 148 0.160 10 102 156 0.160 10 102 156 0.160 10 102 156 0.160 10 109 165 0.160 10 109 165 0.200 10 115 175 0.200 10 115 175 0.200 10 121 184 0.200 10 121 184 0.200 10 121 184 0.200 10 128 195 0.200 10 128 195 0.200 10 134 205 0.200 10 134 205 0.200 10 134 205 0.250

10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0

(W118)

(W118)

Design: HSS, DIN 340, type N. Right cutting, bright surface, steam tempered from 2.5 mm, profile grinding with precise point geometry. Normal angle of rake, normal core thickness core gradient higher than normal. Hole depth 10 x D. Application: Particularly suitable for deep drilling in alloyed/ non-alloyed steels and casting types above 800 N/mm 2 , nodular iron, sintered iron, nickel silver and graphite. Note: Further dimensions available on request. Spiral drill with cyl. Shank, profile grinding, long

DIN 340

Type N

HSS

118°

25–30°

1045

steam

1046

steam

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1045 1046

22 22

18 18

22 22

30 30

6WHHOV XSWR

6WHHOV XSWR

1045

1046

1045

1046

∅ h8 mm

∅ h8 mm

Order No.

PU

Order No.

PU

Spiral length mm

Total length mm

Spiral length mm

Total length mm

1PP

1PP

f mm/rev

f mm/rev

steam

steam

steam

steam

0100 0150 0200 0250 0300 0310 0320 0330 0350

1.0 3.01 6.30 1.5 2.13 4.41 2.0 1.46 2.98 2.5 1.48 3.22 3.0 1.59 3.26 3.1 1.98 4.06 3.2 1.66 3.43 3.3 1.83 3.92 3.5 1.81 3.85

10 33 56 0.016 10 45 70 0.050 10 56 85 0.050 10 62 95 0.063 10 66 100 0.080 10 69 106 0.080 10 69 106 0.100 10 69 106 0.100 10 73 112 0.100

0400 0410 0420 0450 0500 0510 0520 0550 0580

4.0 2.02 4.20 4.1 2.36 4.90 4.2 2.02 4.27 4.5 2.30 4.83 5.0 2.47 5.30 5.1 3.29 5.90 5.2 2.82 5.95 5.5 2.95 6.10 5.8 2.95 6.30

10 78 119 0.100 10 78 119 0.100 10 78 119 0.100 10 82 126 0.100 10 87 132 0.100 10 87 132 0.125 10 87 132 0.125 10 91 139 0.125 10 91 139 0.125

(W100)

(W101)

(W100)

(W101)

Continued overleaf

1/37

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Made with FlippingBook flipbook maker