Catalog FORMAT Plus- 2017 - 2018

Drilling tools

89

m

Solid carbide small diameter drill, 5 x D

Design: solid carbide, according to factory standard. TiAIN coated surface, right cutting, with special point geometry and ratio point thinning. Normal angle of rake, without core gradient. Drill with internal cooling. The drill has a very good self-centring behaviour and produces short chips, even from long-chipping materials. Application: For accurate alignment drilling with very narrow ∅ tolerances and good surfaces. Suitable for drilling holes up to 5 x D with high cutting values. Particularly suitable for long and short-chipping materials such as construction and case-hardening steels, steel castings, tempered steels, carbon steels, bronzes, castings, high alloy AlSi alloys and alloy steels up to 1400 N/mm 2 in strength.

Solid carbide

Factory standard

5xD

140°

30°

Cutting Tools 1

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1211

70

65

50

55

6WHHOV XSWR

6WHHOV XSWR

1211

1211

∅ = m 7

∅ = m 7

Order No.

Spiral length mm

Total length mm

Shank ∅ = h 6 mm

Order No.

Spiral length mm

Total length mm

Shank ∅ = h 6 mm

1PP

1PP

f mm/rev

f mm/rev

mm

mm

TiAlN

TiAlN

0014 0015 0016 0017 0018 0019 0020 0021

1.4 60.90 ◊ 1.5 60.90 ◊ 1.6 60.90 ◊ 1.7 63.40 ◊ 1.8 63.40 ◊ 1.9 63.40 ◊ 2.0 65.80 ◊ 2.1 65.80 ◊

11 12 13 14 14 15 16 17

52 52 52 56 56 56 56 62

4 4 4 4 4 4 4 4

0.045 0.045 0.045 0.045 0.045 0.045 0.055 0.055

0022 0023 0024 0025 0026 0027 0028 0029

2.2 65.80 ◊ 2.3 67.50 ◊ 2.4 67.50 ◊ 2.5 67.50 ◊ 2.6 67.50 ◊ 2.7 67.50 ◊ 2.8 69.10 ◊ 2.9 69.10 ◊

18 18 19 20 21 22 22 23

62 62 62 62 66 66 66 66

4 4 4 4 4 4 4 4

0.055 0.055 0.055 0.055 0.055 0.055 0.055 0.055

(W117)

(W117)

Solid Carbide spiral drill, SuperLine, 5 x D

Design: Ultra-finest grain-solid carbide, DIN 6537, type RT 100 U. Fire coated surface, right cutting with special point geometry and ratio point thinning. Normal angle of rake, core thickness thicker than normal and without core gradient. The drill has a very good self- centring behaviour and produces short chips, even from long-chipping materials. Carbide application group: K/P –universal use. (Ultra-fine grain K05–K50/P05–P50) Application: For accurate alignment drilling with narrow ∅ tolerances and good surfaces. Suitable for drilling holes up to 5 x D with high cutting values. Particularly suitable for long and short-chipping materials such as construction and case-hardening steels, steel castings, tempered steels, carbon steels, bronzes, castings, high alloy AlSi alloys and alloy steels up to 1200 N/mm 2 in strength. Note: The drills can be sharpened and recoated several times.

Type RT 100 U

DIN 6537

Solid carbide

5xD

140°

3

DIN 6535-HA

1212 Fire

DIN 6535-HE

1215 Fire

DIN 6535-HA

1218 Fire

DIN 6535-HE

1221 Fire

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1212 1215 1218 1221

110 110 125 125

105 105 120 120

85 85 85 85

155 155 140 140

55 55 65 65

45 45 55 55

25 25 35 35

55 55 60 60

40 40 45 45

260 260 310 310

270 270 325 325

6WHHOV XSWR

1212

1215

1218

1221

∅ d 1 = m7 mm

Order No.

Spiral length I 2 mm

Shank length I 3 mm

Overall length l 1 mm

Shank ∅ d 2 = h6 mm

1PP

f mm/rev

Fire

Fire

Fire

Fire

0300

3.00

33.00 (W112)

35.00 (W112)

48.00 (W112)

49.00 (W112)

28

36

66

6

0.080

Continued overleaf

1/71

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Made with FlippingBook flipbook maker