Catalog FORMAT Plus- 2017 - 2018

Drilling tools

98

Deep hole drill, 30 x D

Design: Ultra-finest grain-solid carbide, factory standard. TiAIN coated surface, right cutting. Special slot form with double bevels, special point geometry and special point thinning. With inner cooling. Angle of rake 30° Application: For drill holes with very narrow ∅ tolerances and very good surfaces. Suitable for drilling extremely deep holes up

Type RT 100 T

Solid carbide

Factory standard

DIN 6535-HA

30xD

135°

Cutting Tools 1

to 30 x D with high cutting speeds. Particularly suitable for short-chipping materials such as cast iron, grey cast iron, malleable cast iron and nodular graphite iron and aluminium alloys with a high silicon content. Note: The drills can be sharpened several times.

d 1

3

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1236

80

80

80

70

50

80

120

100

6WHHOV XSWR

6WHHOV XSWR

1236

1236

∅ m7/ h7 mm

∅ m7/ h7 mm

Order No.

Spiral length I 2 mm

Order No.

Spiral length I 2 mm

Shank length I 3 mm

Overall length l 1 mm

Shank ∅ d 2 = h6 mm

Shank length I 3 mm

Overall length l 1 mm

Shank ∅ d 2 = h6 mm

1PP

1PP

f mm/rev

f mm/rev

TiAlN

TiAlN

0300 0350 0400 0450 0500 0550 0600

3.0 296.40 3.5 296.40 4.0 321.00 4.5 374.60 5.0 380.70 5.5 401.30 6.0 448.60

100 36 140 136 36 176 136 36 176 168 36 208 168 36 208 200 36 240 200 36 240

6 0.100 6 0.125 6 0.125 6 0.125 6 0.125 6 0.160 6 0.160

0650 0700 0750 0800 0850 0900 1000

6.5 485.70 ◊ 7.0 485.70 ◊ 7.5 545.40 ◊ 8.0 576.20 8.5 607.10 ◊ 9.0 648.30 ◊

232 36 272 8 0.200 232 36 272 8 0.200 263 36 303 8 0.200 263 36 303 8 0.200 295 40 339 10 0.250 295 40 339 10 0.250 327 40 371 10 0.250

10.0 648.30

(W114)

(W114)

HM single flute drill

Design: Solid carbide, factory standard, type EB 80. TiN coated surface, right cutting, 1-edged, standard point geometry, lengthways divider, larger oil chamber, circumference form G. Application: For long chipping steels.

HM Werks- norm Factory standard

Typ EB 80 y e

Carbide

20xD

TiN

40xD

TiN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1239 1240

80 80

75 75

65 65

65 65

30 30

25 25

55 55

35 35

80 80

150 150

120 120

6WHHOV XSWR

1239

1240

∅ d 1

Order No.

Clamping length I 2 mm

Overall length l 1 mm

Shank length I 3 mm

Shank ∅ d 2 mm

1PP

f mm/rev

mm

1239

1240

1239

1240

TiN

TiN

0400 0420 0450 0500 0550 0600 0650 0700 0800 0900 1000 1200

4.0 4.2 4.5 5.0 5.5 6.0 6.5 7.0 8.0 9.0

– –

77.20 ◊ 81.30 ◊ 82.30 ◊ 83.30 ◊ 84.40 ◊ 87.50 ◊ 89.50 ◊ 93.60 ◊ 97.80 ◊

– –

185 195 205 232 252 272 292 322 372

– –

230 240 250 280 300 320 340 370 420

45 45 45 48 48 48 48 48 48 48 50 50

12 12 12 16 16 16 16 16 16 16 20 20

0.008 0.010 0.010 0.010 0.010 0.010 0.013 0.013 0.013 0.022 0.022 0.028

75.10 ◊ 77.20 ◊ 79.20 ◊ 83.30 ◊ 84.40 ◊ 85.40 ◊ 89.50 ◊ 95.70 ◊ 102.90 ◊ 123.50 ◊

120 130 140 160 170 185 210 230 260 310

170 180 190 210 220 235 260 280 320 370

10.0 12.0

110.10 ◊ 129.70 ◊

406 550

510 600

(W113)

(W113)

1/80

Made with FlippingBook flipbook maker