Costs of a waterjet cutting machine

Example case: Let’s assume that we have a setup of a 0.35 orifice setup with 1 cutting head, 1 pump and an abrasive setting of 450g/min. Then the following overview of the operational costs per hour can be generated. However, be aware that a specific calculation is always dependent on quality, speed, orifice type, cutting pressure and other variables in the process. Therefore, operational costs can differ significantly between applications.

COST PER HOUR [€]

Cut Energy / 3,77

Abrasive / 10,13

Orifice / 0,53

Abrasive tube / 1,3

Mixing chamber / 0,38

Cut Water / 0,06

In many regions, electricity costs are lower in the night. Why not produce when costs for running your equipment is low? With the ACM machine from Resato, overnight cutting is no longer a myth. Contact our experts to learn more about our electronic-monitoring system (EMS). DID YOU KNOW THAT CUTTING IN THE NIGHT CAN SAVE ELECTRICITY COSTS? EXPERT TIP

www.resato.com/call-me-back

10

WWW.RESATO.COM

COSTS OF A WATERJET CUTTING MACHINE