New-Tech Military Magazine | 03-04 2019

Computers Components Computers Electro Optic & Camera Packaging & Producti Electro Optic & Camera Packaging & Production Motion Automotive

Automotive

IoT

New Products Motion Components Motion Automotive Computers

Motion

n

Components

Communication

"MCDI" : לפרטים נוספים 077-540-6075 : ט 153-77-540-6051 : פ office@mcdi-ltd.com www.minicircuits.com

and IP3 from 1MHz to 1GHz. An internal shutdown feature protects the amplifier in the presence of pulsed signals while keeping the power supply at constant voltage to minimize DC power consumption. This model provides 1.1dB noise figure and +39.2dBm IP3, making it ideal for maximizing sensitivity and dynamic range in high- performance receiver applications. It delivers 22.8dB typical gain with ±3.0dB flatness, and ++19dBm output power at 1dB compression. The amplifier is fabricated using E-PHEMT technology with excellent repeatability. It operates on a single 8V supply, and comes housed in a tiny 12-pad 3x3mm QFN package. "MCDI" : לפרטים נוספים 077-540-6075 : ט 153-77-540-6051 : פ

Mini-Circuits’ Tiny MMIC Gain Slope Equalizers Flatten DC-20GHz Mini-Circuits’ EQY-5-24+ is an absorptive MMIC gain equalizer with a negative 5.1dB slope versus frequency from DC to 20GHz. Fixed slope MMIC equalizers are useful for flattening negative gain slope in wideband amplifiers, receivers and transmitters in applications from wireless communications to broadband/optical, satellite, defense and more. This model is capable of handling up to +34dBm RF input power and provides 20dB typical return loss across its full bandwidth. Fabricated using highly repetitive GaAs IPD technology, this equalizer provides outstanding repeatability of performance, making it suitable for volume production. It comes housed in a 2x2mm 8-lead QFN package, saving board space and minimizing the effect of parasitics. EQY-series MMIC gain slope equalizers are available with a wide range of slope values to meet your needs. "MCDI" : לפרטים נוספים 077-540-6075 : ט 153-77-540-6051 : פ

Mini-Circuits’ Tiny LTCC Dual/Differential Low Pass Filter, DC to 1600MHz Mini-Circuits’ DLFCV-1600+ is a dual low pass filter with a passband from DC to 1600MHz designed into a single 1210 ceramic package. This design allows customers to use a single unit in systems where two filters of the same passband are required, saving board space. The dual filter can also be used as a differential filter in differential circuits where interference and noise must be minimized. This model provides 1.5dB passband insertion loss, 50dB stopband rejection, and RF input power handling up to 3W (each filter). It supports a wide range of applications and is ideal for minimizing interference at amplifier inputs and ADC outputs. "MCDI" : לפרטים נוספים 077-540-6075 : ט 153-77-540-6051 : פ

office@mcdi-ltd.com www.minicircuits.com

Mini-Circuits’ Tiny High- Rejection LTCC Low Pass Filter, DC to 530MHz Mini-Circuits’ LFCG-530+ is an LTCC low-pass filter with a passband from DC to 530MHz. This model provides 1.0dB typical passband insertion loss and stopband rejection of 30dB typ. The filter is capable of handling up to 4W RF input power and provides a wide operating temperature range from -40°C to 85°C. Housed in a tiny 0805 ceramic form factor with wraparound terminations, the LFCG-530+ is ideal for dense PCB layouts with minimal performance variation due to parasitics.

office@mcdi-ltd.com www.minicircuits.com

office@mcdi-ltd.com www.minicircuits.com

Mini-Circuits’ High Dynamic Range MMIC Amplifier with Shutdown Feature, 1MHz to 1GHz Mini-Circuits’ TSS-13LN+ ultra- high dynamic range MMIC amplifier provides industry-leading noise figure

New-Tech Military Magazine l 70