Echo Commodity Solutions

Commodity Solutions

Contents

Tools

page 34

Commodity Solutions Services

page 1

Crimpers

Overview

1

34-35

Cable Cutters

35-37

Wire Printing & Striping

2

Punch & Dies

37-38

Wire Barreling

3

Utility Line Locator

38

Wire Pulling Heads

3

Wire Paralleling Options

4-5

Test & Measurement

page 39

page 6

Paralleling Reels

39

Diagnostic Testers

Insulation Testers

39-40

Paralleling Reels

6-8

40

Thermal Imaging Cameras

page 8

Reel Stands

Wire Specications

page 41

Large Capacity Reel Stand & Roller

8

Copper Conductor

41-52

Reel Stands

9-10

Termination Kits

53

Cable Pulling

page 11

Portable Cord

54-55

Welding Cable

56-57

Cable Pullers

11-15

Romex Cable

58-59

Wireless Safety Switch System

15

Aluminum Conductor

60-72

Cable Puller Trailer

16-17

Diesel Locomotive Cable

73-74

Pulling Heads & Rope

18-19

HCF, MC Cable

75-78

Cable Guides

20-27

IMSA Traffic Signal Cable

79

Wire Carts

28-29

Conduit Fill Table

80

page 30

Pipe Bending

page 81

Conduit Specications

Pipe Benders

30-31

EMT Conduit

81-82

Hydraulic Pump

31

GRC Conduit

83

ARC Conduit

84

page 32

Material Handling & Jobsite Storage

IMC Conduit

85

Pipe Racks

32

Nonmetallic Conduit

86-89

Storage Cabinets

32

90-91

Coated Rigid Conduit

page 33

Jobsite Trailers

Copper to Aluminum Conversion

page 92

Heated & Lighted Utility Trailer

33

Cable Reel Trailers

33

Generator Trailer

33

Commodity Solutions Services

• Managing and warehousing of products stored inside and kept separated from Echo stock • Cut, spool and parallel wire • Jobsite delivery • Piggyback forklift • Wire trailer available to rent for jobsite use • Dedicated personnel to manage your onsite inventory • Wire striping 16 gauge and larger • Wire printing 16 gauge - gauge (call for other sizes) 10 • Barreled wire • Colored feeder cable • Parallel reels • Pulling heads and accessories • Tool and equipment rental program

1

Wire Printing & Striping

Wire Label Printing X • Printing Black or White lettering on #16 - 10 AWG wire (call for larger sizes) • • Printing on regular non-slick and no-lube wire • Available for: - Solid or StrandedWire - Fire Alarm Cable - Data Cable - Belden Type Cable • Print is spaced every 2-3 inches depending on length of label applied (can be adjusted more, or less) • • No character limit (only spacing is adjusted) • Printing cost will vary with amount and complexity

Wire Striping X

• Printing on #16 AWG and larger wire • Striping on regular non-slick wire • Available for: - Solid or StrandedWire • Special applications can be done with up to 3 different colored stripes • • Stripe colors available:

- Black - White - Blue - Violet - Green - Yellow - Orange - Brown - Gray

Wire Stripe Colors

2

Wire Barreling & Pulling Heads

Wire Barreling X • Fiber barrels in 24", 32" and 43" sizes

• Rule-of-thumb easy method to determine what ts is to divide the maximum barrel capacity by the number of • conductors to determine the maximum length, or divide • by length to determine maximum conductors • • Maximum footage and number of conductors that t in a 43" barrel: • - #14 stranded - max. 55,000' = 25 conductors - #12 stranded - max. 32,000' = 20 conductors - #10 stranded - max. 22,000' = 16 conductors - #8 stranded - max. 10,000' = 12 conductors - #6 stranded - max. 8,000' = 7 conductors - #12 solid - max. 30,000' = 15 conductors - #10 solid - max. 20,000' = 12 conductors • Barrels can be split for longer lengths • Capable of doing Barrel Layering if requested using cardboard dividers with a leader from the previous layer • poked through so it pulls up and out easily (both leader • and cardboard divider) • • Printed and Striped wire can me mixed • Barreling cost will vary with amount and complexity • Barrel carts and taps available for sale and rental

Crimp-on Pulling Heads X • Pre-installed single-use Crimp-on Pulling Heads are available for each reel of wire, or for large groups of control wire • • Certi ed to install iToolco and Southwire pulling heads • Pulling head work for both Copper and Aluminum • Also available for sale in bulk

3

Wire Paralleling Options

• 4, 5 and 6 compartment paralleling reels • Variety of different sizes and capacities • Free Spin compartment for smaller neutral or ground conductors

• available in DUAL Free Spin compartments • Cut and parallel #12 through 900 MCM

Paralleling Reels Available as Small as 29" Wide

Reel Capacities Available as Large as 1100' of 500 MCM Per Compartment

4

Wire Paralleling Options

4 Compartment Quad Spool Capacity

Max. Wire Length Per Compartment

Max. Wire Length Free Spin Compartment

Wire Size

4250 ft.

6

7500 ft.

4

4700 ft.

2750 ft.

1750 ft.

3300 ft.

2

2500 ft.

1350 ft.

1

1200 ft.

2100 ft.

1/0

2/0

1900 ft.

900 ft.

3/0

1400 ft.

800 ft.

4/0

1100 ft.

650 ft.

250

900 ft.

500 ft.

300

800 ft.

450 ft.

350

700 ft.

375 ft.

400

600 ft.

350 ft.

500

500 ft.

275 ft.

600

400 ft.

225 ft.

750

325 ft.

175 ft.

900

275 ft.

150 ft.

1000

235 ft.

125 ft.

4 Copmartment Quad Spool with Free Spin Compartment X • 47" O.D. • Single compartment for ground • Includes A-frame with casters

4 Copmartment Quad Spool X X • 40" O.D., 16" I.D., 32" wide

Wood Spool X X

• Available on A-frame • Can parallel any length and as many colored • conductors as needed • • 8 AWG - 600 AWG Cu • 1 AWG - 750 AWG Al

• Available on A-frame • 8 AWG - 600 AWG Cu • 1 AWG - 750 AWG Al

• 8 AWG - 600 AWG Cu • 1 AWG - 750 AWG Al

5

Paralleling Reels

46W x 3

46W x 2

46W x 3 Speci cations

46W x 2 Speci cations

46.25"

46.25"

A-FrameWidth Drum Diameter Reel Diameter

A-FrameWidth

Drum #1 Diameter Drum #2 Diameter Reel #1 Diameter Reel #2 Diameter

36" 57"

36" 28" 68" 57"

Compartment Widths

9"

44.25" x 49"

Height x Length

Compartment #1Width Compartment #2Width

21.5" 11.5"

44.25" x 49"

Height x Length

300 Series with Casters

750 Series with 1 Free Spin

300 Series with Casters Speci cations

750 Series with 1 Free Spin Compartment Speci cations

46.25"

51" 15" 55"

A-FrameWidth Drum Diameter Reel Diameter

A-FrameWidth Drum Diameter Reel Diameter

15"

39.5" 5.75" 3.25"

Compartment #1, 2, 3 and 4Widths

Compartment #1, 2 and 3Widths Free Spin Compartment #4Width

9" 8"

Compartment #5Width

44" x 49"

44.25" x 49"

Height x Length

Height x Length

6

Paralleling Reels

325 Series with 2 Free Spin

325 Series + Sidecar

325 Series with 2 Frees Spin Compartments Speci cations

325 Series Sidecar Speci cations

43" 15"

46.25"

A-FrameWidth Drum Diameter Reel Diameter

A-FrameWidth Drum Diameter Reel Diameter

15" 37"

39.5"

Compartment #2, 3 and 4Widths

5"

6" 4"

Compartment Width

44.25" x 49"

Free Spin Compartment #1 and 5Widths

Height x Length

31.5" x 36"

Height x Length

75 Series

75 Series + Sidecar

75 Series Speci cations

75 Series Sidecar Speci cations

34"

46.25"

A-FrameWidth Drum Diameter Reel Diameter

A-FrameWidth Drum Diameter Reel Diameter

15.5"

15" 37"

37"

Compartment Widths

5"

9"

Compartment Width

44.25" x 49"

44.25" x 49"

Height x Length

Height x Length

7

Paralleling Reels

200 Series

50 Series

200 Series Speci cations

50 Series Speci cations

43" 15"

29" 15" 15"

A-FrameWidth Drum Diameter Reel Diameter

A-FrameWidth Drum Diameter Reel Diameter

39.5"

Compartment #1, 2 and 3Width

3.25"

6.5"

Compartment #1, 2, 3 and 4Widths

6"

2.5"

Compartment #4Width

Compartment #5Width

31.5" x 36"

Height x Length

44.25" x 38"

Height x Length

Large Capacity Stand & Roller

Large Capacity Reel Stand

CUR615 Reel Roller

Large Capacity Reel Stand Speci cations

Reel Roller Speci cations

10,000 lbs.

30,000 lbs.

Weight Capacity Max. Reel Size

Weight Capacity Max. Reel Size

up to 10'

up to 96" x 12' 122" x 19" x 61"

Width x Height x Depth

8

Reel Stands

® ™ Maxis Pro-Jax Reel Stands X Features

Equipment Rental Available

• One person can easily transport through most jobsite environments • Minimum drill recommendations: 18V cordless, equivalent of 1,000 in. lb. torque rated, for reels 10,000 lbs. • • Easy adjustment for uneven surfaces on jobsite • Axle rests on steel rollers for easy wire pay off • Axle safety guard ensures that reel will not fall off of jack stands

• On board Southwire PROJAX™ Axle Holder • PROJAX™ stands can lift up to 10,000 lbs. (pair) • Can be used with 1-1/4" to 3" axle

Instruction Manual

Width

Depth

Weight 118 lbs. (single)

Part Number

41" Height

17"

MPJ02

43"

® ™ Maxis Jax Reel Stands X Features • Easy to store and transport • Breaks down into a compact storable tool

• Jaw clamps onto axle so that wire reels won't come off of fall over • Multiple steel rollers make it easy for one person to roll off heavy • wire • Max lever allows one person to lift wire reels off the ground with minimal effort • • Each pair lifts wire reels up to 3,000 lbs. • Uses either a 1-1/2" to 2" rigid pipe for an axle • Works on reels up to 48" tall

Width

Depth

Weight 54 lbs. (pair)

Part Number

37" Height

7"

MJ707

9.5"

9

Reel Stands

™ Real Big Jacks Jack Stands X Features • Holds up to 20,000 lbs. • Made from US steel • Axle rides on 4 large bearing-ed rollers • Feed from your own trailer • Transport spools up to 10,000 lbs. without a forklift (20,000 lbs. with a forklift) • • Telescoping to t different width spools

• Load and reload without a forklift • Easily maneuver spools into position

Equipment Rental Available Instruction Manual

Width

Length

Weight 560 lbs.

Part Number

69" Height

44" - 66"

RBJ20K

58"

™ Real Tender Rope Tender Light and maneuverable, it's easy for one person to set up and transport. It can be used horizontally or vertically making it exible on the job. X Features • Saves time • Crank handle for faster re-spooling • Prevents injuries from lifting and handling rope • No more lifting heavy wire spools • Axle-less technology • Multidirectional

• Rolls over rough terrain on jobsite • Keeps expensive rope high and dry X Capacity • Spool width: 12" - 35" • Spool diameter: 12" - 32" • Weight limit: 300 lbs.

Instruction Manual

Length 49" - 60"

Weight

Part Number

23" Width

RT01

38"

10

Cable Pulling

® Maxis XD1 Extreme Duty Circuit Puller X Features • Lightweight and portable • One person setup and operation • Accepts most commercial 18V cordless drills • Removable capstan to facilitate polyline removal • Expandable length up to 34.5 inches • Polyline pin on capstan to prevent slippage during the pull • Anodized for corrosion resistance • Field replaceable chuck adapter • 600 lbs. of constant pulling force with 1,000 lbs. peak pulling force • Expandable with 1" rigid conduit • Threaded receiver for 3/4" monopole support

Equipment Rental Available

Instruction Manual

Height

Width

Length 28.5"

Weight 80 lbs.

Part Number

Maxix ® XD1 Extreme Duty Circuit Puller Description

8.75"

XD1

8"

® Maxis MK6 Heavy Duty Cable Puller X Features • One person, 2 minute setup and operate • 2 pulling speeds: 12 fpm on low (at no load) and 44 fpm on high (at no load) • • Quickly adapts from underground to overhead pulls • No need to bolt to the ground on most pulls • 6,000 lbs. peak capacity • Versatile, can adapt to virtually any wire pull • Can be anchored to most trucks standard 2" receiver hitch • Able to pull up to 9 ft. of wire out of the conduit

Instruction Manual

MK6 Tripod X Features • Easily attach to the M6K cable puller • Helps when pulling from transformer pads, vaults, and meter bases • Setup in 2 minutes • Helps to pull out extra wire

Length

Width

Depth 20"

Weight 195 lbs. 45 lbs.

Part Number

Maxix ® M6K Heavy Duty Cable Puller Description Tripod for M6K - adjustable 3' to 6' height

45"

M6K

21"

-

P6T02

13" - 50"

-

11

Cable Pulling

® Maxis XD10 EXTREME Duty Cable Puller X Features • Gear reducer design allows for increased efficiency, durability and power while maintaining low operating temperature • • 10,000 lbs. peak pulling force with a continuous pulling rating of 7,000 lbs. • Fixed caster brakes aid in set up and positioning • Includes single foot control • Telescoping front and mid section

• Twice as fast as the leading competitor under load • Fork tubes, brakes and 10" casters for mobility X Bolt Down Adapter (sold separately) • Easily attaches to the XD10 without any disassembly • Stand alone roller system for improved rope path

Equipment Rental Available

Capacity

Pulling Speed High at 2,000 lbs. = 20 fpm at 4,000 lbs. = 18 fpm

at 2,000 lbs. = 11 fpm at 4,000 lbs. = 10 fpm Pulling Speed Low at 6,000 lbs. = 9 fpm at 7,000 lbs. = 8 fpm at 10,000 lbs. = 7 fpm

- - -

Instruction Manual

Height

Width

Length 70" 16"

Weight 598 lbs. 35 lbs.

Part Number

Description

Maxix ® XD10 EXTREME Duty Cable Puller XD10-BD Maxis ® XD10 Bolt Down Kit

40" 18"

XD10 XD10-BD

26" 14"

XDTM Extreme Duty Tension Monitor X Features • Working load: 10,000 lbs. • USB port for easy data extraction • Back lit screen allows for easy viewing • Built in battery for long life • Anodized aluminum frame for durability • 5 roller design means one calibration covers full range of rope sizes • Top handle for easy mounting

• No disassembly for rope insertion • Large soft touch button controls • Includes XD10 mounting bracket

Instruction Manual

12

Cable Pulling

® UT2 Ultra Tugger 2 Cable Puller X Features • 2,000 lbs. pulling force • Two-speed capstan: Fast for up to 1,000 lbs., Standard for up to 2,000 lbs. • Dedicated high power/weight ratio pulling motor • Adjustable square tube construction • Weighs only 67 lbs. including motor • Uses patent pending "Quick Latch" system to attach to conduit • Puller base includes wheels • Right-angle sheave X Pulling Capability

Equipment Rental Available

• 3 x 500 kcmil cable 500' with 2 x 90° bends • 3 x 250 kcmil cable 500' with 4 x 90° bends • 8 x 4/0 AWG cable 500' with 3 x 90° bends

Instruction Manual

® 6805A Ultra Tugger Cable Puller X Features • 8,000 lbs. pulling force

• Pulling speed ranges from 9 fpm at 2,000 lbs. to 6 fpm at 8,000 lbs. • Mobile Versi-Boom™ system provides fast set-up with no anchors to set or chains to mount • • Boom uses 3" rigid steel conduit for easy length adjustment to pull 10 to 20 feet of cable • • Direct drive gear • Easy to move around jobsite with mobile carriage • Floor mount included X

Pulling Capacity • No load: 9 fpm • 2,000 lbs: 8 fpm • 4,000 lbs: 7.5 fpm • 6,000 lbs: 7 fpm • 8,000 lbs: 6 fpm

Instruction Manual

13

Cable Pulling

® G3 Tugger Cable Puller X Features • 20% faster cable pulls • High-speed pulls up to 1,000 lbs. • 25% stronger continuous pulling load • Durable motor designed for pulling load • 3 times faster setup • No loose pieces

• High speed: 97 fpm • Low speed: 41 fpm X Pulling Capacity High Speed • No load: 97 fpm • 500 lbs: 59 fpm • 1,000 lbs: 36 fpm

Low Speed • No load: 41 fpm • 1,000 lbs: 21 fpm • 2,000 lbs: 13 fpm

Equipment Rental Available

Instruction Manual

™ G6 TURBO 6000 LB Cable Puller X Features • Setup in less than 60 seconds • No loose pieces, allowing quick changeover for easy transport • No adapter needed, easily clamp to conduit in seconds • Dual capstans increase pulling speeds and maximize efficiency • Two speed motor specially designed for 6,000 lb. pulls • Circuit breaker monitor for safe auto shutoff and extend motor life • Force indicator prevents damage to puller • Built-in dolly for fast easy transport • Ergonomic design eliminates heavy lifting during setup • Right-angle sheave allows the operator to stand out of the direct line of force • X Pulling Force

• 4,000 lbs. continuous • 5,000 lbs. intermittent • 6,000 lbs. momentary

Instruction Manual

14

Cable Pulling

® Maxis Feeder X Features • Designed and built speci cally to accommodate "No-Lube" wire • Forward and reverse, variable speed, feeds up to 30 fpm • May be used with Southwire® Triggers™Wireless Safety Switch System for simultaneous feeder/puller control • • Solid rubber tires and swivel casters for easy jobsite maneuverability and will never go at • • Digital footage meter allows easy monitoring of approximate conductor length being fed • • Uses grooved serpentine roller design with increased surface area for increased traction force • • Maximum traction force: single conductor 800 lbs., 4 conductors 1,600 lbs. on "No-Lube" THHN 500 MCM • • Cable capacity: 8 x 250 MCM, 6 x 500 MCM, 5 x 750 MCM

Equipment Rental Available

Instruction Manual

Width

Length

Weight 366 lbs.

Part Number

35" Height

26"

MCF01

44"

® Triggers Wireless Safety Switch System Safety system is designed to control the input power of any piece of jobsite equipment. X Features • Works with all brands of electrically driven equipment • Saves time by avoiding unnecessary stops and restarts • High visibility LED status lights • Monitors amperage draw indicating when to switch puller to low speed • • Triggers® Wireless Safety Switch System is UL listed and FCC Certi ed and carries an IP55 rating •

• Foot controls contain dual redundant activation switches • Military grade 6.8 amp hour lithium ion battery packs • Stand alone roller system for improved rope path

Optional FB-01

Instruction Manual

Width 21.50"

Height 12.54"

Weight 30 lbs.

Part Number

16.42" Depth

TSS-01 FB-01

Optional feeder adapter for TSS01

15

Cable Pulling

APS75 Cable Puller X

The Condux APS75 Hydraulic Underground Cable Puller provides up to 7,500 lbs. of continuous pulling power to tackle some of the toughest pulling applications. X Designed for installing underground cable, the APS75 is completely self-contained and transports easily from jobsite to jobsite. Industry leading features like antitwist rope, digital monitoring, rotating pulling arm and wired remote control make the APS75 the most advanced pulling system on the market today. X The APS75 is precision manufactured to the highest standards. Each puller is backed with years of underground cable pulling experience and a commitment to quality customer service. X Features • Maximum pull line: 7,500 lbs.

• User friendly electronics • Downloadable pull data • Wireless remote control • 49HP Tier4 motor Equipment Rental Available

APS75 Specs

Performance

7,500 lbs. 175 fpm

Maximum Line Pull Maximum Speed

Engine

Diesel 34HP

Engine Type Horsepower

12V

Electrical System

Fuel Tank

18 gal.

Dimensions Bullwheel

8.5" dia. with 6 grooves

Antitwist Rope Rope Reel with Built-in Level Wind

2,600' of 3/8"

Tool Circuit Hydraulics Dimensions

7 gpm at 2,000 psi

80" 96"

Width Height Length Weight

HIGH-END HYDRAULIC SYSTEM

HYDRAULIC TOOL CIRCUIT

129"

4,500 lbs. wet

Instructional Video

STABILITY

SAFETY

ANTITWIST ROPEWITH LEVELWIND EASY TO OPERATE

HYDRAULIC JACKS

USB PORT

16

Cable Pulling

APS75 Cable Puller with Compressor All of the same features of the APS75 with a 185 CFM at 100 PSI air compressor.

Equipment Rental Available

APS75 w/ Air Compressor Specs

Performance

7,500 lbs. 175 fpm

Maximum Line Pull Maximum Speed

Engine

Diesel 34HP

Engine Type Horsepower

12V

Electrical System

Fuel Tank

18 gal.

Dimensions Bullwheel

8.5" dia. with 6 grooves

Antitwist Rope Rope Reel with Built-in Level Wind

2,600' of 3/8"

Tool Circuit Hydraulics Dimensions

7 gpm at 2,000 psi

80" 96"

Width Height Length Weight

178"

6,500 lbs. wet

Air Compressor

185 cfm at 100 psi

Velocity

Hose w/ Couplings

3/4" x 50' air hose reel

Aluminum A-Frame for APS75 The APS75 A-Frame extension adds productivity by adjusting quickly to difficult pulling situations. Added reach for pulling extra slack is ideal for manhole applications and challenging job site conditions.

Part Number

Description

08771350

Aluminum A-Frame APS75

17

Cable Pulling

® ™ Maxis Grips Pulling Heads X Features

• Dual lock pulling system using both a cam lock head and a double braided wire to quickly secure cable to rope without the fear of losing • a conductor • • Each double lock Maxis® Grips™ head rated at 4,000 lbs. Axle rests on steel rollers for easy wire pay off • • Holds securely to NO-LUBE® wire • Disconnect wire from pulling heads in 2 minutes without cutting the • wire • No cutting, stripping or weaving of wire to make pulling head • Easily moves through conduit and around 90° bends • Keeps pulling head tight for easier movement through conduit

Equipment Rental Available Instruction Manual

Pulling Jacket

Rope Swivel

Part Number

Grips

# of Grips Complete Set

Wire 1/0 - 750MCM

Med. X

Lrg. X

Sml. X -

Lrg. X

Double Locking Head X

GP110

Complete Set

GP00AA GP101A GP102B GP103C GP104D

Group AA Group A Group B Group C Group D

4 Grips 4 Grips 4 Grips 4 Grips 4 Grips

1/0 - 4/0 3/0 - 4/0

- - X

- - -

- - -

- - -

X X

250 - 350MCM 400 - 500MCM 600 - 750MCM

- -

X X

- -

X X

X X

Rope Clevis Connects pulling head and rope to eliminate winding and tangling of rope and wire during cable pulls. Designed to pass over sheaves, pulleys and rollers. X Features Pulling Swivel • 6,000 lb. wivel: 1-1/4" diameter, 5/8" maximum rope size S • 10,000 lb. Swivel: 1-5/8" diameter, 1" maximum rope size • Pin roller design added for larger diameter rope and for added strength by spreading load pressure • Rope Clevis • 6,000 lb. Clevis: 1-1/4" diameter, 5/8" maximum rope size • 10,000 Clevis: 1-5/8" diameter, 1" maximum rope size • Connects to cable grip and pulling rope

Part Number

Description

MS114 MS158 RC114 RC158

6,000 lb. Pulling Swivel 10,000 lb. Pulling Swivel 6,000 lb. Rope Clevis 10,000 lb. Rope Clevis

18

Cable Pulling

® QWIKrope An innovative high performance pulling rope that is UV resistant, lightweight and ultra low stretch. X Features • High performance pulling rope made from ultra molecular weight polyethylene bers • • 12 strand single braided 9/16" pulling rope with a breaking strength of 32,000 lbs., pound for pound stronger than steel • • 2 sizes for all your circuit wire pulls: 1/8" pulling rope with a breaking strength of 1,100 lbs., and a 1/4" pulling rope with a breaking strength • of 7,500 lbs. • • Ultra low stretch, UV resistant, lightweight pulling rope • 24% reduction in the coefficient of friction, as compared to traditional pulling rope • • Dual factory installed pulling eyes • Does not absorb water, no rope rot • Need only one size rope (9/16") for feeder conductor pulls up to 10,000 lbs. • • 1/8" QWIKrope can easily be vacuumed into any conduit run up to 290 ft. • • 9/16" QWIKrope recommended for use with Maxis M3K, M6K and XD10 cable pullers •

Equipment Rental Available

Part Number Diameter Length Ave. Breaking Strength QWIKrope for use in Feeder Conductor Pulls SPR9612 9/16" 1,200' 32,000 lbs. SPR969 9/16" 900' 32,000 lbs. SPR966 9/16" 600' 32,000 lbs. SPR963 9/16" 300' 32,000 lbs.

Part Number Diameter Length Ave. Breaking Strength QWIKrope for use in Circuit Wire Pulls SPR183 1/8" 300' 1,100 lbs. SPR143 1/4" 300' 7,500 lbs. SPR146 1/4" 600' 7,500 lbs.

Duct Rodder Condux Duct Rodders combine ease of operation and reliable performance to help increase the efficiency of your rodding operations. X Duct Rodder cages have been designed to be lighter weight for easy handling in the eld. They feature sturdy construction and a hand-operated wheel brake. They can be used on their side as well as upright. X Equipped with a threaded end tting on each end, and a tapered head on the outward end.

Duct Rod Diameter

Duct Rod Pull Strength

Core OD

Coating OD

Minium Bending Radius

IN.

IN.

IN. 0.5

IN. 11

MM LBS

N

MM

MM

MM 280

Part Number

9/16

08083210F

13

1,400 6,227

0.375 9.5

13

Instruction Manual

19

Cable Pulling

Jamb Skid The Condux Jamb Skid is a device for supporting sheaves or quadrant blocks inside a manhole to pull cable into underground conduit. X By positioning the top of the Jamb Skid against the underside of the manhole opening, and using the camlock foot pedal, set-up can be done in a fraction of the time it takes to install a hanging sheave assembly. Pulling tension actually increases the stability of the Jamb Skid during the pull. No dangerous breakage of chains or straps. The Jamb Skid is especially useful when there are no pulling-in irons available, or when the existing irons do not align correctly with the duct opening. The Jamb Skid can be placed anywhere within a 360° radius inside the manhole. X Constructed of solid aluminum, the Jamb Skid is both strong and lightweight. In most instances, it can be installed by one person. The complete unit is created by combining a base unit with one of several extension units, depending upon the height required. Locking 1.25" (32 mm) pins, allow the height adjustment of the Jamb Skid. Also, the width adjusts from 7" (178 mm) to 11" (279 mm) to accept all Condux sheave assemblies up to 8" (203 mm). 10,000 lbs. (44,480 N) cable tension load rated. X NOTE: Order base section and choice of extension separately for a complete Jamb Skid unit. Locking pins are included with the base section.

Extension

Equipment Rental Available

Sheave Pin

Locking Pins

IN. M Manhole Height Range

Part Number

Description

Base Section

-

08097000 08097001 08097002 08097003

58" (1.17 m) Base Section 43" (1.09 m) Extension 76" (1.93 m) Extension 109" (2.8 m) Extension

-

63 - 80 78 - 109 107 - 138

1.14 - 2.03 1.98 - 2.77 2.72 - 3.51

Replacement Pins

Part Number

Description

08097040 08097060

1.25" (32 mm) diameter pin Locking pin kit

Replacement Sheaves

Sheave Size

Shaft Diameter

IN.

IN.

MM

MM

Part Number

5 x 20

08042911

127 x 508

1.25

32

4,000 lb Sheaves

IN.

IN.

MM

MM

Part Number

8 x 26

08042651

203 x 660

1.25

32

20

Cable Pulling

Flexible Cable Guides with Aluminum Adapters Cable feeds through the Bell Adapter and exits through the Duct Adapter which ts into the duct. Bell Adapter and Duct Adapter included for speci c duct and guide size ordered. Other lengths available upon request.

Equipment Rental Available

Diameter

Length

IN.

MM FT.

M

Part Number

2 2 4 4 5 5 6 6 8 8 2 2 2 2 2 4 4 4 4 5 5 5 5 5 6 6 6 6

08931009 08931012 08934009 08934012 08935009 08935012 08936009 08936012 08988009 08988012

51 51

9

2.7 3.6 2.7 3.6 2.7 3.6 2.7 3.6 2.7 3.6

12

102 102 127 127 152 152 203 203

9

12

9

12

9

12

9

12

Duct Adapters

O.D.

Diameter

Duct Size

I.D.

IN.

IN.

MM IN.

MM

MM IN.

MM

Part Number 08960200** 08931010

-

51 51 51 51 51

innerduct

-

1.00 0.72 1.00 1.19 1.66 1.65 2.69 3.13 3.69 1.75 2.75 3.25 3.75 4.50 3.50 4.63 5.63 7.62

25 18 25 30 42 42 68 87 94 44 70 83 95

1.00 1.25 1.50 2.00 2.00 3.00 3.50 4.00 2.00 3.00 3.50 4.00 5.00 4.00 5.00 6.00 8.00

25 32 38 51 51 76 89 51 76 89

0.90 1.22 1.44 1.91 1.91 2.94 3.44 3.94 1.98 2.98 3.45 3.93 4.93 3.93 4.93 5.94 7.94

23 31 37 49 49 75 80 50 76 88

08931013 08931015 08931020* 08934020 08934030 08934035 08934040* 08935020 08935030 08935035 08935040 08935050* 08936040 08936050 08936060* 08988080*

102 102 102 102 127 127 127 127 127 152 152 152 203

102

100

102 127 102 127 152 203

100 125 100 125 150 202

114

* Included with Flexible Cable Guides with Aluminum Adapters for that speci c duct size. X ** Tapered and threaded to t over 1-2" (25-51 mm) innerduct.

89

118 143 194

Bell Adapters *

Size

I.D.

IN.

MM IN.

MM

Part Number

2 4 5 6 8

08931000 08934000 08935000 08936000 08988000

51

2.00 4.00 5.00 6.00 8.00

51

102 127 152 203

102 127 152 203

* Included with Flexible Cable Guides with Aluminum Adapters for that speci c duct size.

21

Cable Pulling

Extensions - Includes Mounting Bolts

Diameter

Length

IN.

MM FT.

M

Part Number

2 2 2 2 4 4 4 4 5 5 5 5

08931503 08931506 08931509 08931512 08934503 08934506 08934509 08934512 08935503 08935506 08935509 08935512

51 51 51 51

3 6 9 3 6 9 3 6 9

0.9 1.8 2.7 3.6 0.9 1.8 2.7 3.6 0.9 1.8 2.7 3.6

Diameter

Length

IN.

MM FT.

M

12

Part Number

6 6 6 6 8 8 8 8

102 102 102 102 127 127 127 127

08936503 08936506 08936509 08936512 08988503 08988506 08988509 08988512

152 152 152 152 203 203 203 203

3 6 9 3 6 9

0.9 1.8 2.7 3.6 0.9 1.8 2.7 3.6

12

12

Equipment Rental Available

12

12

Aluminum Split Bells Plugs into conduit in manhole wall, guiding cable safely into the conduit regardless of the pulling angle.

Size

Tube Length

Tube I.D.

Tube O.D.

IN.

IN.

MM IN.

MM 203 203 304

MM IN.

MM

Part Number

4 5 6

3.63 4.63 5.63

08041540 08041550 08041564

102 127 152

8 8

92

3.88 4.88 5.88

98

117 143

124 149

12

Lube Adapter Plates for Flex Guides Lube Adapter Plates may be used at either the bell end or on the duct adapter end. Simply remove the bell or adapter end and insert lube adapter plate, then use supplied longer bolts to nish the lube adapter plate assembly.

Bell Size

IN.

MM 102 127 152

Part Number

4 5 6

08934075 08935075 08936075

22

Cable Pulling

Adjustable Manhole Adapter Designed to work with CableGlider Cable Pullers, the Condux Adjustable Manhole Adapter allows greater stability and versatility for manhole pulls. The rugged aluminum frame provides an adjustable platform to t 18" (450 mm) to 46" (1,168 mm) manholes. X Use the frame to position a cable puller above a manhole. Installation is easy, the t is secure, and the strength is a maximum 12,000 lbs. (53,376 N).

Equipment Rental Available

Instruction Manual

Part Number

Description

08674750 08674760 08674752

Adjustable Manhole Adapter 4" plate adapter

6" plate adapter

Three Sheave Cable Guide Three cast aluminum or Nylatron® sheaves on bronze bearings allow a gradual 90° turn for easy pulling through manhole opening. Pulling radius of 24" (610 mm), the cable guide will sit on manhole edge, suspend in manhole, or t the jamb skid. 10,000 lbs. (44,480 N) cable tension load capacity. Support bar sold separately. Replacement sheaves available.

Size

Weight

Part Number

Nylatron Part Number

IN.

MM LBS.

KG

6 8

08539600 08539800*

08539610 08539810*

152 203

132 164

60 92

* NOTE: To t the jamb skid, the four bolts holding the hook must be removed.

Mini Corner Cable Guide Features two hardened steel rollers that guide steel winch line over sharp edges. It is small but sturdy, allowing for easy handling and set-up along with heavy duty capacities. 10,000 lbs. (44,480 N) cable tension load capacity. Replacement sheaves available.

Part Number

Description

08045000 08045010

Mini Corner Cable Guide Mini Corner Cable Guide w/o hook

23

Cable Pulling

4,000 lb. Hooked Hanger Sheaves Tie off in manhole to guide cable into and out of duct. 4,000 lbs. (17,793 N) cable tension load capacity. Replacement sheaves available. X Features • Steel welded frame • Nylon cable protectors • Lightweight • Cast aluminum sheaves • Forged hook with 1.12" (28.45 mm) opening

Sheave Size

IN.

MM

Part Number

5 x 11 5 x 11 5 x 20

08042611 08042610 08042620 08042610 08042620

127 x 279 127 x 279 127 x 508 127 x 673 203 x 660

Aluminum

Nylatron

Equipment Rental Available

Aluminum Aluminum Aluminum

5 x 26.5

8 x 26

Part Number

Description

08042670

Second arm for 8" x 26" (203 x 660 mm) sheave, 1,000 lb. (4,448 N) rating for hanging only Replacement arm for 8" x 26" (203 x 660 mm) sheave

08042680

8,000 lb. Capacity Hook Type Sheaves

Diameter

Width

24 lbs. 46 lbs. 69 lbs. 101 lbs. Weight

Part Number

12" 18" 24" 36"

812 818 824 836

5" 6"

6-1/2" 6-3/4"

Cable Feeding Sheave Plugs into conduit in manhole wall, guiding cable safely into the conduit regardless of the pulling angle.

Part Number

Description

08617340 08617260

Feeding Sheave - 4" SCH80 Duct

Feeding Sheave - 6"

24

Cable Pulling

441 Series Cable Feeding Sheaves X Features

Equipment Rental Available

• Yoke frame slides into the end of conduit and holds sheave allowing the cable being fed into the conduit to smoothly roll over the sheave • • 5" wide aluminum alloy sheave with self-lubricating bearings • Split tube for easy removal after cable is installed

Instruction Manual

Conduit Size

Conduit Size

Part Number

Part Number

2"

4" 5" 6"

441-2

441-4 441-5 441-6

2-1/2"

441-2-1/2

3"

441-3

3-1/2"

441-3-1/2

® Maxis HDR6-12x7A Duct Roller Designed to assist in guiding cables into ducts or conduit and help reduce "Cable-Scuffing" on the edge of duct or conduit. The "Slotted Duct Adapter" assists in removing this tool from cable, once the cable is pulled into place. X Features • 7" wide roller, 6" shaft • Alloy aluminum • Heat-treated for hardness • Precision machined ® Maxis HRR-D12-7A / HRR-D10-5A Rim Rollers Double sheave, light weight, high-strength sheave-type cable guide. Use this tool for cable feed-in or cable pull-out for vaults and hand holes. Protects cable from scuffing on rim of vault. Pull force locks roller to edge of vault. X Features • Can be used for large diameter cable • Housing: Powder-coated steel • (2) Sheaves: 12" x 7" • Available in 5" and 7" widths

25

Cable Pulling

® Maxis HB1A-6 Cable Tray Roller X Features • Capacity: 300 lbs.

• 6" zinc plated or stainless steel rollers • "T"-handle clamp with swivel base

• 3/8" locking pin for locking and unlocking unit • Adjustable angle for various cable tray sizes • Cable space between rollers is approximately 4" x 4" • Ball-bearing roller for reduced pulling tension

Instruction Manual

Equipment Rental Available

® Maxis HB1A-9 Universal Split Box Roller X Features • Working load - 600 lbs. • Can be extended above the cable tray by using optional HBFB extension with the standard cross-bar • • Using optional 90° bracket with the cross-bar, HB1A-9 can be mounted with the force rollers on the sides above or below the cable tray • • Includes ball-bearing rollers for reduced pulling tension • Can be mounted above or inside the cable tray by using a standard cross-bar and end-tray clamps • • Cable space between rollers is approx. 4-5/8" x 4-3/4" • One-piece cast aluminum housing • Open top for easy access

Instruction Manual

® Maxis HB1A-9STC Universal Split Box Roller with Side Tray Clamp X Features • Working load - 600 lbs. • Ball-bearing roller for reduced pulling tension • Cable space between rollers is approximately 4-5/8" x 4-3/4" • One piece cast aluminum housing • Open top for easy access

26

Cable Pulling

® Maxis HB4A-12x5 Inside Vertical Riser Roller 12" with 48" Crossbar and Clamps X Features

Equipment Rental Available

• Adjustable cable tray clamps for multiple setup con gurations • 48" base is usable with multiple tray roller con gurations • Standard 12" diameter x 5" wide aluminum sheave and vertical bracket with 3/4" diameter axle • • Designed for guiding cable around turns in cable tray • Ball-bearing roller for reduced pulling tension

Instruction Manual

® Maxis HB5A-12x5 Horizontal Elbow Roller 12" with 48" Crossbar and Clamps X Features • Adjustable cable tray clamps for multiple setup con gurations • 48" base is usable with multiple tray roller con gurations • Standard 12" diameter x 5" wide aluminum sheave and vertical bracket with 3/4" diameter axle • • Designed for guiding cable around turns in cable tray • Ball-bearing roller for reduced pulling tension

Instruction Manual

® Maxis HB9A Outside Vertical Riser and Straight Section Roller X Features • Ball-bearing rollers for reduced pulling tension • Roller create a minimum bend radius • For use guiding cables around outside vertical risers and through straight sections in cable tray • • One-piece cast aluminum housing • Open top for easy access • Single point for securing to crossbar

27

Cable Pulling

™ SIMpull BARREL Hand Truck X Features • The SIMpull BARREL Hand Truck, when used with the SIMpull BARREL package, replaces the old wire cart and reels and the issues • associated with them • • The hand truck includes a wire payoff feature, and is designed to transport the SIMpull BARREL package anywhere on the jobsite - • through narrow electrical room doors, over cords on the oor or • construction gravel • • Solid rubber tires for no- at jobsite peace of mind • Rugged steel frame with unique design

Width

Length

Weight 145 lbs.

Part Number

61" Height

SBT01 Equipment Rental Available 24.5"

27"

™ SIMpull BARREL Tripod X Features • The SIMpull BARREL Tripod is a circuit wire guide that mounts easily on the rim of the SIMpull BARREL • • This wire guide system provides a unique means for guiding the paralleled conductors out of the barrel when it is not on the • SIMpull BARREL hand truck. •

Width

Length

Weight 5.5 lbs.

Part Number

6.25" Height

6.25"

SBT02

36.5"

™ SIMpull CoilPAK Cart X Features • Rugged transport system for (8) SIMpull CoilPAK Payoffs with an integrated payoff system • • Allows CoilPAK Payoffs to be added or changed easily without impacting other CoilPAK Payoffs • • Innovative staging springs allow you to secure and organize up to 8 wires • • Best for scenarios where conductors are frequently changing, adding or dropping • • Individual wire feeds similar to a wire cart • Easy to use in hallways and ts through standard doors

Width

Length

Weight 60.5 lbs.

Part Number

90" Height

24"

CK-01

52"

28

Cable Pulling

Caddy Mac #1 Transports spools on spindles and works as a dolly. Wire is dispensed while laying at. X Features • 1/2" solid spindles are attached to cart • No loose pieces. Spindles lock into place, even during transport • Spindles swing out to set position for convenient loading of wire spools • • Can be used with Handi Mac for extra storage

Equipment Rental Available

Width

Length

Weight 50 lbs.

Part Number

56.5" Height

26"

CM01

20"

® Wire Wagon 510 XL conduit and wire cart. X Features • Holds up to (14) 2,500' spools • Holds several hundred feet of conduit as well as all the additional materials and tools needed for your entire work day • • Designed with a full 24" x 60" metal top shelf for storage and assembly • • 2,000 lbs. capacity

Width

Length

Weight 191 lbs.

Part Number

46.25" Height

29.5"

WW510

60.5"

29

Pipe Bending

™ BENDmax Power Bender X Features

• 3/4" - 2" EMT, IMC and Rigid conduit bender • Easily adjustable to ergonomic working height • Programmable spring back • Back lit display • Billet aluminum hand pendant • 2° leveling adjustment • Industrial grade DC drive and electrical components • Push cart mounted platform

• Bends in vertical and horizontal plane • Free standing conduit support stand

Equipment Rental Available Instruction Manual

Width

Depth

Weight 600 lbs.

Part Number

50" Height

30"

PB2000

38"

® ™ Maxis Extreme Bender X Features • Single shoe bending attachments to bend 1/2" - 2" ridgid conduit and pipe • • Billet aluminum pendant for increased durability • Quick change control cable • Compact removable handle to reduce interference • Designed to work with all product brands

Width

Depth

Weight 320 lbs.

Part Number

44" Height

25"

MXB2000

26"

Electric Bender X Features • 1/2" - 2" EMT, IMC and PVC-coated Rigid conduit bender • Fast and easy setup on the jobsite • Steel reinforced follow bars for long life • 120 VAC • 20 amp GFCI protected receptacle

Instruction Manual

Width

Depth

Weight 260 lbs.

Part Number

44" Height

28.5"

555

20.5"

30

Pipe Bending

Mobile Bending Table X Features • Locking swivel wheels for maneuverability

Equipment Rental Available

• Fork pockets to conveniently move the unit with a fork truck • Ram positioner to ease the setup of the ream to accommodate different size shoes • • Steel pegs with hitch pins for storage of shoes and saddles • Carriage assembly to mount the 881 unit directly to the MBT • Vice-chain to hold conduit securely for accurate bends, prevents conduit from twisting or turning during bend • • Pump basket holds the hydraulic pump for bender unit

Instruction Manual

Width 31-1/2"

Length

Weight 300 lbs.

Part Number

35" Height

881-MBT

67"

777 Hydraulic Bender with 980 Pump X Features • 1-1/4" - 2" one-shot 90° bending • 2-1/2" - 4" segment bending • Strong, portable pin-assembled aluminum components • Easy-to-use ram travel scale and bending charts • Conduit supports index to suit all sizes

Instruction Manual

980 Hydraulic Pump X Features • For use with all Greenlee benders • Useable oil volume: 6 qts. • Handy pendant advance control

• Low voltage pendant coupled to solid state motor controls eliminates contact arcing for greater reliability and longer life • • Automatic or manual ram return selector valve provides more control from the pendant switch • • Molded enclosure protects pump, motor and circuitry in tough working environments • • Use with single-hose hydraulic systems with spring-return rams

Instruction Manual

31

Material Handling & Jobsite Storage

Stackable Conduit & Pipe Rack X Features • 1,000 lb. capacity • 8" diameter casters with tow swivels for maximum mobility • Seven independent bins • Collapsible and stackable design for storage and transportation or one or more racks •

Wemco Conduit Cart X Features • 3,000 lb. capacity • Easily transport oversized raw materials • Open cradle design for easy loading and unloading • Can hold a master bundle of one size conduit

Equipment Rental Available

Jamco Mesh Storage Cabinet X Features

• Closed storage cabinet to secure materials or valuables • All welded construction, adjustable middle shelf, 12 gauge construction and powder coated nish •

Width

Depth

Part Number

57" Height

60"

VD260

24"

Bi-Fold Utility Box X Features

• Maximum storage capacity with minimum oor space requirements • 4 individual 15" x 14-1/2" x 60" storage compartments on each side • Reinforced steel shelves welded in place for added strength • All shelves feature large front lip to keep small items from rolling off • Each bi-fold section is mounted on four casters for easy opening • Recommend #1 and #5 Masterlock padlocks or equivalent

Width

Depth

Part Number

58" Height

60"

5860

15"

32

Jobsite Trailers

Heated & Lighted Utility Trailer X Features • Sheaves and wire stands • Generator ready hookup for power

Equipment Rental Available

Multi-Reel Cable Reel Trailer

Single Cable Reel Trailer

RP80 62kW Generator Trailer

Instruction Manual

33

Tools

® PATRIOT PAT750T3 12-Ton Crimper with T3 Technology X Features • TRACK crimp locations with onboard GPS - BURNDY Exclusive! • TRACE individual crimps with comments and output force validation TRANSMIT via Bluetooth technology and sync data to the cloud • ® • C-head with 1.65" jaw opening and 355 head rotation ° • Uses "U" dies • Patented T-Track alignment guide for HYGROUND as well as other ® asymmetrical connectors • • Bright LED work light and Red/Green LED to validate output force Improved ergonomic design with more balance and better grip to • reduce user fatigue •

Equipment Rental Available

® PATRIOT PAT750 12-Ton Crimper X Features • Reliable connection up to 750 kcmil • Uses "U" dies • 355° rotatable latch head • Audible pop-off indicates properly completed crimps • Ergonomically balanced

12-Ton U-Die Sets Use with: • Y35, Y39, Y750/PAT750 and Y46/PAT46 series • Y46/PAT46 series require use of PUADP-1 adapter for Type YA, YS, YA-A, YS-A non-tension connectors •

Al Part Number

Al Part Number

Wire Size

U8CRT Cu Part Number

Wire Size

U29RT Cu Part Number

#8 #6 #4 #3 #2 #1

U8CABT U6CABT U2CABT U2CABT U1CART U25ART U26ART U27ART U28ART -

250 kcmil 300 kcmil 350 kcmil 400 kcmil 500 kcmil

U29ART U30ART U31ART U32ART U34ART

U5CRT U5CRT U3CRT U2CRT U25RT U26RT U27RT U28RT U1CRT-1

U30RT U31RT U32RT U34RT

535 ex

U38XRT

-

1/0 2/0 3/0 4/0

600 kcmil 750 kcmil

U36RT U39RT

U36ART

U39ART-2

777 ex

U44XRT

-

34