Valeoscope - Transmission Syst. Clutch KIT4P Conversion Kit

8. KIT4P Technical support

8.1.1 After disassembling the gearbox from the engine Check engine crankshaft seal and verify that there is no oil contaminating the flywheel Check the condition of the gearbox input shaft splines Block the flywheel in rotation before removal of the flywheel bolts (1) Check the gearbox input shaft seal Check the clutch actuator (guiding tube surface, clutch lever, receiver push rod or concentric slave cylinder) (2) g g g g g 8.1.2 Fixing the flywheel to the crankshaft Position the flywheel to the crankshaft centre Tighten the bolts in star sequence to the specific tightening torque and angle (3) g g

1

2

3

20