Valeoscope - Transmission Syst. Clutch KIT4P Conversion Kit

8. KIT4P Technical support

8.2.3 KIT4P sticker The KIT4P sticker makes vehicles equipped with a KIT4P easily recognizable. Only the associated Service Kit must be purchased and replaced on the vehicle during second clutch replacement. This sticker must be put on the engine environ- ment once the KIT4P is mounted on the vehi- cle. It resists increased engine temperatures so there is no risk when applied to an appropriate part of the vehicle. Service Kit: once the KIT4P is installed in the vehicle, the rigid flywheel does not require replacement if not damaged. Thus, when the second clutch replacement is due, only the cover, the disc and the bearing need to be replaced. Valeo offers a complete range of Service Kits which feature this advantage and hence lead to reduced cost and labor starting from the second clutch replacement. 8.2.4 KIT4P fitting bolts During each KIT4P replacement, use the bolts supplied in the box and respect tightening infor- mation to avoid any warranty issues. The flywheel bolts and clutch cover bolts are always supplied in all KIT4P boxes. They are specifically designed for each application. Once tightened and used in operation, they should not be reused and must be replaced by new bolts provided in the box each time.

24