MAXX22T_Maintenance Service_R2
Inspecting the Rotor (2/2)
CONFIDENTIAL
Checking the runout of the brake rotors 1. Fasten the dial indicator to the brake caliper.
2. With the rotor installed, check the runout by rotating the wheel hub. Max value = 0.006” (0.15mm).
3. Replace the brake rotor or have it properly resurfaced if the runout is more than 0.006” (0.15 mm). Also replace if, after resurfacing, the thickness is below the allowed minimum.
© 2015 Hendrickson USA, L.L.C. All Rights Reserved
Made with FlippingBook