MAXX22T_Maintenance Service_R2

CONFIDENTIAL Checking guide pin bearing play (2/2) 6. Press the dial indicator against the measuring point on the brake caliper.

7. Apply force to tilt the caliper as far as possible toward axle, and set the dial indicator to zero.

8. Apply force to tilt the caliper as far as possible in the opposite direction.

9. Read the dial indicator. The bearing play must not be greater than 0.08” (2 mm).

10. Replace the guide bushings if the measured play is greater than 0.08” (> 2 mm).

© 2015 Hendrickson USA, L.L.C. All Rights Reserved

Made with