MAXX22T_Maintenance Service_R2

Removing brake pads (3/4)

CONFIDENTIAL

7. To prevent rotation, use your hand to push the pressure plate towards the inboard side, with the adjuster piston pin in the pressure plate slot. NOTE: Damage can occur to the boot if the piston is allowed to rotate. 8. Use the adjusting wrench to turn the adjuster counterclockwise as far as it will go. Then turn the adjuster clockwise ~90 degrees.

9. Check adjuster boot for wear and damage. Replace if damaged or worn.

10. Manually push the brake caliper outboard and remove the outboard brake pad.

© 2015 Hendrickson USA, L.L.C. All Rights Reserved