MAXX22T_Maintenance Service_R2

Removing brake pads (4/4)

CONFIDENTIAL

11. Manually push the brake caliper inboard and remove the inboard brake pad.

12. Remove the pressure plate from the caliper.

13. Check the pressure plate for excessive corrosion and damage. Replace if necessary. Always replace by axle.

14. Use a wire brush to clean pressure plate, guide groove on caliper and pressure plate and all machined surfaces on the brake caliper. Remove any corrosion. NOTE: Avoid causing any damage to the protection boots.

© 2015 Hendrickson USA, L.L.C. All Rights Reserved