MAXX22T_Maintenance Service_R2

Checking the adjuster unit

CONFIDENTIAL

1. While checking the adjuster, restrain the adjuster piston pin to prevent rotation and damage to the adjuster piston. NOTE: This can be accomplished by temporarily installing the pressure plate. 2. Use the adjusting wrench to turn the adjuster clockwise towards the brake rotor. Check for ease of movement.

3. Following the test, rotate the adjuster piston clockwise up to the stop position and back again.

4. If necessary, check the adjuster. (Refer to slide 8)

© 2015 Hendrickson USA, L.L.C. All Rights Reserved