MAXX22T_Maintenance Service_R2

Installing the brake pads (1/4)

CONFIDENTIAL

NOTE: The pressure plate must always be placed correctly in the guide groove and is to entirely cover the machined surfaces.

1. Manually move the brake caliper inboard until there is sufficient clearance to insert the pressure plate.

2. Insert the pressure plate into the caliper.

3. Slide the pressure plate up against the adjuster piston with the adjuster piston pin fitting into the pressure plate slot. NOTE: It may be necessary to move the brake caliper and / or rotate the adjuster piston until the pin engages the slot of the pressure plate.

4. Ensure the adjuster piston boot is not twisted.

© 2015 Hendrickson USA, L.L.C. All Rights Reserved

Made with