MAXX22T_Maintenance Service_R2

Installing the brake pads (3/4)

CONFIDENTIAL

9. Place a new retainer spring onto the pressure plate. NOTE: Brake pad retainer springs are pre-attached. DO NOT REMOVE.

10. Insert the pad retainer bar into the holes of the brake caliper.

11. Push the pad retainer bar fully into the holes while pushing downward so the retainer springs are engaged into the bar and there is sufficient clearance to install the pad retainer bar screw.

12. Fasten the new pad retainer screw to the brake caliper with the specified torque.

© 2015 Hendrickson USA, L.L.C. All Rights Reserved

Made with