MAXX22T_Maintenance Service_R2

Installing the brake (1/2)

CONFIDENTIAL

1. Remove all shipping material from the new brake.

2. Check the connecting surface on the axle torque plate and the brake carrier. Remove any dirt, rust or oil. NOTE: The MAXX22T torque plate is designed to prevent mixing of left and right brakes. An arrow painted on or cast in the brake caliper indicates the brake rotor’s direction of rotation moving forward.

3. Place the brake assembly, with the brake carrier, on top of the brake rotor and mount the brake onto the axle.

4. Tighten the screws.

© 2015 Hendrickson USA, L.L.C. All Rights Reserved