MAXX22T_Maintenance Service_R2

Replacing the brake chamber (3/4)

CONFIDENTIAL

8. Place the chamber onto the caliper.

9. Use a wrench to screw new fastening nuts onto the brake chamber until the chamber fully rests on the caliper.

10. Torque nuts to specifications.

11. Attach the brake hose to the brake chamber according to chamber manufacturer’s specifications.

12. Ensure enough slack is added to the brake hose to prevent stress. Also secure hoses to avoid obstruction of brake caliper movement over its entire stroke.

© 2015 Hendrickson USA, L.L.C. All Rights Reserved