MAXX22T_Maintenance Service_R2

Replacing adjuster piston boot (2/4)

CONFIDENTIAL

6. Check the brake caliper. If dirt or moisture has entered the brake or if the boot seat in the brake caliper is worn or damaged, replace the brake.

7. Mark the position of the pin on the adjuster piston on the caliper. The pin must be located in the same position after checking the adjuster piston.

8. Manually turn adjuster piston counterclockwise about 1.18” (30 mm) out of the caliper.

9. Check the thread adjuster piston for corrosion, wear and damage.

© 2015 Hendrickson USA, L.L.C. All Rights Reserved