MAXX22T_Maintenance Service_R2

Replacing adjuster piston boot (3/4)

CONFIDENTIAL

10. Replace the adjuster piston boot if dirt or water has penetrated into the caliper or if the boot has been worn or damaged.

11. Ensure the seal is correctly seated in the boot seat of the caliper. If necessary, press the seal back into the boot seat by hand.

12. Clean the adjuster piston boot seats.

13. Grease the thread of the adjuster piston.

14. Manually turn the adjuster piston clockwise back into caliper. The pin should be in the same position as it was in step 7.

© 2015 Hendrickson USA, L.L.C. All Rights Reserved