MAXX22T_Maintenance Service_R2

Replacing adjuster boot (3/3)

CONFIDENTIAL

8. Manually press the adjuster boot fully into the caliper boot seat.

9. Install the mounting bushing onto the mounting bushing and press it against the inner boot bead until the boot bead lies in the boot seat of the adjuster.

10. Remove the mounting bushing and mounting cap.

11. Check correct seat of the adjuster boot in the boot seat.

12. Push a new adjuster plug into the opening and ensure a tight fit.

© 2015 Hendrickson USA, L.L.C. All Rights Reserved