TPT May 2010

T echnology U pdate Two new models boost productivity on job sites MOST pipelining job sites require a mix of heavy machinery to manoeuvre pipes into place. McElroy’s new MegaMc ® pipe stands are self-contained, gasoline-powered pipe stands that alleviate the need for a piece of heavy machinery to hold the pipe in place. Two models are available: a large 36 to 65" model accommodates pipes up to 16,000lb (7,257kg), while a smaller 8 to 36" model handles pipe up to 9,000lb (4,082kg). Besides the productivity gained from allowing heavy machinery to be used elsewhere on the site, the MegaMc Pipe Stands offer 24" of lateral movement, as well as 34" of vertical adjustability. This freedom of movement allows the operator to manoeuvre the stick of pipe to the height of a thermoplastic pipe fusion machine. “We believe the MegaMc Pipe Stands will offer great benefits on medium and large diameter pipe fusion job sites,” said Chip McElroy, president and chief executive officer of McElroy. “The new pipe stands represent our dedication to creating modular productivity equipment that helps contractors do more with less.” The MegaMc Pipe Stands are gasoline-powered but will not churn through gas. In fact, the units are designed to hold a set height after the operator turns the hydraulic power unit off. Since the unit is self-contained, no hydraulic hoses will be running across the ground of the job site. Rugged rollers with low-friction pillow block bearings allow the pipe to move easily. Even with a wide stable base, the pipe stands can be stacked for storage or shipping and are moveable with a forklift or crane. McElroy – USA Email: thenning@mcelroy.com Website: www.mcelroy.com CE-marked steel and aluminium tubes PRECIS Inter Holding JSC, a producer of electro-welded steel and aluminium tubes, is continuing to expand its product range and to adapt to market developments. Since 2008, one new steel tube production mill has become fully operational, and another one is to be installed, enabling the company to cover the broad range of steel tubes from 9.75 to 168.3mm in diameter. The company has also added new sizes to its range of aluminium tubes. The company is able to apply the CE mark to its steel and aluminium tubes for use in construction, in compliance with the EU Construction Products Directive, as most of the company’s production is intended for the European market. In addition to construction, the steel and aluminium tubes produced by Precis Inter Holding also find wide application in the furniture and household and sporting equipment production. Precis Inter Holding JSC – Bulgaria

Email: sales@precis-inter.com Website: www.precis-inter.com

66

M ay 2010

www.read-tpt.com

›