AMPC-D_US-EN

BURNISHING | S.C.A.M.I.® Roller Burnishing Systems

Stock Allowance | Imperial (inch) Roller Burnishing

A

DRILLING

Recommended Stock (inch) by Burnisher Diameter*

Hardness (BHN) 100 - 180 180 - 250 85 - 180 180 - 275 125 - 180 180 - 325 125 - 180 180 - 375 240 - 450 125 - 180 180 - 350 150 - 200 200 - 250

ISO Material

0.1850" - 0.4724" 0.0004 - 0.0007 0.0004 - 0.0007 0.0004 - 0.0007 0.0004 - 0.0007 0.0004 - 0.0007 0.0004 - 0.0007 0.0004 - 0.0007 0.0004 - 0.0007 0.0004 - 0.0007 0.0004 - 0.0007 0.0004 - 0.0007 0.0004 - 0.0007 0.0004 - 0.0007

0.4725" - 0.9843" 0.0007 - 0.0016 0.0007 - 0.0016 0.0007 - 0.0016 0.0007 - 0.0016 0.0007 - 0.0016 0.0005 - 0.0007 0.0007 - 0.0016 0.0005 - 0.0007 0.0005 - 0.0007 0.0007 - 0.0016 0.0005 - 0.0007 0.0007 - 0.0016 0.0005 - 0.0007

0.9844" - 1.9685" 0.0010 - 0.0018 0.0010 - 0.0018 0.0010 - 0.0018 0.0010 - 0.0018 0.0010 - 0.0018 0.0005 - 0.0010 0.0010 - 0.0018 0.0005 - 0.0010 0.0005 - 0.0010 0.0010 - 0.0018 0.0005 - 0.0010 0.0010 - 0.0018 0.0005 - 0.0010

1.9686" - 6.5315" 0.0012 - 0.0020 0.0012 - 0.0020 0.0012 - 0.0020 0.0012 - 0.0020 0.0012 - 0.0020 0.0008 - 0.0014 0.0012 - 0.0020 0.0008 - 0.0014 0.0008 - 0.0014 0.0012 - 0.0020 0.0008 - 0.0014 0.0012 - 0.0020 0.0008 - 0.0014

Free-Machining Steel 1118, 1215, 12L14, etc.

Low-Carbon Steel

B

1010, 1020, 1025, 1522, 1144, etc.

Medium-Carbon Steel

1030, 1040, 1050, 1527, 1140, 1151, etc.

BORING

Alloy Steel

P

4140, 5140, 8640, etc. High-Strength Alloy 4340, 4330V, 300M, etc. Structural Steel A36, A285, A516, etc.

Tool Steel

H-13, H-21, A-4, 0-2, S-3, etc.

C

High-Temp Alloy

140 - 310

0.0004 - 0.0007

0.0005 - 0.0007

0.0005 - 0.0010

0.0008 - 0.0014

S

Hastelloy B, Inconel 600, etc. Titanium Alloy Stainless Steel 400 Series 416, 420, etc. Stainless Steel 300 Series 304, 316, 17-4PH, etc. Grey Cast Iron, Ductile Iron, Spheroidal Cast Iron (Pearlitic) Spheroidal Cast Iron (Ferritic)

140 - 310

0.0004 - 0.0007

0.0005 - 0.0007

0.0005 - 0.0010

0.0008 - 0.0014

REAMING

135 - 350

0.0004 - 0.0007

0.0007 - 0.0016

0.0010 - 0.0018

0.0012 - 0.0020

M

135 - 275

0.0004 - 0.0007

0.0007 - 0.0016

0.0010 - 0.0018

0.0012 - 0.0020

< 200 > 200

0.0004 - 0.0007 0.0004 - 0.0007 0.0004 - 0.0007

0.0005 - 0.0007 0.0005 - 0.0007 0.0005 - 0.0007

0.0005 - 0.0010 0.0005 - 0.0010 0.0005 - 0.0010

0.0008 - 0.0014 0.0008 - 0.0014 0.0008 - 0.0014

K

260 - 320

D

Copper and Alloys

< 500

0.0004 - 0.0007

0.0007 - 0.0016

0.0010 - 0.0018

0.0012 - 0.0020

Brass Bronze

N

BURNISHING

< 180

0.0004 - 0.0007

0.0007 - 0.0016

0.0010 - 0.0018

0.0012 - 0.0020

Bronze Phosphorous Aluminum and Alloys

< 150

0.0004 - 0.0007

0.0007 - 0.0016

0.0010 - 0.0018

0.0012 - 0.0020

*Stock value is on diameter.

E

THREADING

X

SPECIALS

IMPORTANT: The speeds and feeds listed on these pages are a general starting point for all applications. Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

www.alliedmachine.com | 1.330.343.4283

D: 43

Made with FlippingBook HTML5