Kolter Homeowner Guide

With a plunger 1. Add enough water so the plunger cup is covered completely.

3. Remove the plunger. The water should drain. If not, repeat steps 1 and 2.

Opening the trap If a plunger doesn’t work, try opening the drain trap.

2. Push down the plunger so the cup covers the drain opening completely. Build pressure in the pipe by moving the plunger up and down 10 to 20 times in a row. Maintain the seal between the plunger and drain as you pump up and down.

1. Set an empty bucket or pan beneath the trap.

91