THE UK OFFSHORE OIL AND GAS FABRICATORS DIRECTORY
2015
page 110
Capabilities and Capacities – Facility 1
Total Area (m²)
210,000 m
2
Fabrication Area Covered
(m²)
• 8,580 m
2
consisting of four main halls
• Additional fabrication area of 1,800 m
2
available for preparation and
cutting workshop, assembly workshop, pipe fabrication workshop
and stainless steel fabrication workshop
• Specific clean workshop for super duplex projects
Assembly and Erection
Area (m²)
• 22,300 m
2
• Additional 14,000 m
2
available if necessary
Cranage – Lifting Capacity
and Hook Height
(Tonnes and Metres)
• Workshops 1 to 4 – 2 x 30 tonnes (including five tonne auxiliary)
per workshop, hook height 21 metres
• Paint workshop – 2 x 10 tonnes
• Preparation and cutting workshop – 2 x 10 tonnes
• Assembly workshop – 1 x 16 tonnes
• Pipe fabrication workshop – 1 x 10 tonnes
• Stainless steel fabrication workshop – 1 x 5 tonnes
• 12 tonne mobile crane and various forklifts
• 126 tonne transporter
• Additional cranes, self-propelled modular transporters etc, hired
to suit project requirements as necessary
Load-Out Capacity
(Tonnes)
14,000 tonnes, 27.5 tonnes/m
2
Minimum Water Depth
(Metres)
• 200 metre quay – 3.9 metres lowest astronomical tide (LAT)
• Angle load-out quay – 4.5 metres LAT
Maximum Water Depth
(Metres)
• 200 metre quay – 9.5 metres mean high water springs (MHWS)
• Angle load-out quay – ten metres MHWS
Dry-Dock Capability
Not applicable
>
