PAGE 17
PRICES SUBJECT TO CHANGEWITHOUT NOTICE
BLADES
NG306
Optional
Guard
Bolsters
Included
NG305
Optional
Guard
NG505
Optional
Guard
NG314
JANTZ SUPPLY
★
1-800-351-8900
★
Designed in the traditional Tanto style, the
upswept tip and wide handle make this blade
stand a cut above. Our fabricated ivory handle
material and mosaic pins will complete this
special Tanto in the style it deserves. Pre-drilled
with three 3/16" tang holes and two 3/32" bolster
holes to help in designing your bolster from our
brass, nickel silver bar or contrasting material. 12
1/2" overall, the blade is 6 1/2" x 1 3/16" wide
and 3/16" thick.
This tremendous 15 1/2" overall length Bowie
will get everyone’s attention! A showpiece or an
impressive hunting-survival knife. 440C stainless
steel clip point blade 10" long x 1 7/8" wide, .230"
thick and 3/16" pin holes are predrilled in tang for
1/4" Corby Rivets or 3/16" Mosaic Pins. Guard
measures 1/4" x 3/4" x 4".
Available sheath KT485.
The Gator Bowie is a smaller 440C stainless steel
clip point bowie. Just the right size to really use.
Take it hunting, fishing, camping. A legendary
blade scaled down to fit today’s lifestyle. Overall
length is 10 1/4", blade is 6" long x 1 1/8" wide,
3/16" thick. Tang is predrilled with three 1/8" pin
holes. Brass and Nickel Silver guards measure
1/4" x 3/4" x 3".
Available sheath KT109.
This Scorpion may look fierce, but makes a great
showpiece as well as a very useful letter opener.
The unusual design is known as a single sided
dagger, ground only on one side, leaving the
blade flat on the other side. Made from Super
Tuff stainless steel, satin finished and ready for
your choice of handle. 10 1/2" overall, the 1" wide
x 3/16" thick blade is 5 1/2" long and serrated 1
1/8" on both sides. Tang is threaded 6x1mm.
The Nanook is made from Super Tuff 8A stainless
steel, hollow ground and satin finished. The
false top edge adds to its classic beauty. Overall
length is 11 1/2", blade is 5 3/4" x 1 1/2" wide x
3/16" thick. Tang is threaded 6x1mm.
Available
sheath KT111.
The Massive Combat Bowie is made from Super
Tuff 8A stainless steel. Satin finished, hollow
ground blade is distinguished by its uniquely
designed top double false edge. The overall
length is 13 1/2", blade is 7 1/2" long x 1 3/8"
wide and .200" thick. Tang is threaded 6x1mm.
Available sheath KT128.
CAT.# DESCRIPTION
PRICE
Gator Bowie
22.95
Unshaped Brass Guard
6.95
Unshaped NS Guard
9.95
CAT.# DESCRIPTION
PRICE
Nanook Blade
59.95
SS Fighter Guard
12.95
Unshaped Brass Guard
6.95
Unshaped Brass Pommel
4.95
Unshaped NS Guard
9.95
Unshaped NS Pommel
6.95
CAT.# DESCRIPTION
PRICE
Combat Bowie Blade
59.95
SS Fighter Guard
12.95
nshaped Brass Guard
6.95
Unshaped Brass Pommel
4.95
Unshaped NS Guard
9.95
Unshaped NS Pommel
6.95
CAT.# DESCRIPTION
PRICE
Crocodile Bowie
34.95
Unshaped Brass Guard
6.95
Unshaped NS Guard
9.95
Shaped Stainless Guard
8.95
CAT.# DESCRIPTION
PRICE
Traditional Tanto
29.95
Brass Bolster Set
6.95
CAT.# DESCRIPTION
PRICE
Scorpion Blade
49.95
Unshaped Brass Guard
6.95
nshaped Brass Pommel
4.95
Unshaped NS Guard
9.95
Unshaped NS Pommel
6.95
Hollow ground mirror finish blade. 6A High
Carbon Stainless Steel. 13 1/2" overall, 1 1/8"
wide, 8 3/4" double edge blade, approximately
3/16" thick. Tang is threaded 6x1mm.
CAT.# DESCRIPTION
PRICE
Virginia Dagger
34.95
Unshaped Brass Guard
6.95
shaped Brass Pommel
4.95
The tanto is a specialty tactical blade used and
displayed throughout Japan. The distinctive lines
of this design are bold and clean. Complete with
a nickel silver bolster set, easy to install with the
suppled pins. The tang design allows virtually any
handlematerial desired for an imaginative look. 11
1/2" overall, the blade is 6 1/8" x 1 1/8" wide and
3/16" thick, bolster is 1" x 1 1/8" x 3/16" thick with
2.5mm pins. Tang holes are drilled for 3/16" pins.
CAT.# DESCRIPTION
PRICE
Japanese Tanto w/Bolster
49.95
Heavy 3/16" thick fighting blade is 9 1/2" overall,
with 4 3/4" x 1 1/8" wide blade section. Upper
3 1/2" false edge and cross guard. Extra heavy
tang is drilled for two CP600 rivets and CP500
thong tubing. Use the CP607 brass to form a
contrasting guard if desired or shape the handle
material to conform to the pre-formed cross
guard.
Available sheath KT111.
CAT.# DESCRIPTION
PRICE
ommando Fighter Blade
39.95
This satin finished premium 8-A stainless
steel hollow ground blade is easy to hold and
practical to use. Overall length is 9-1/2", blade
is 4-1/2" x 1" x 5/32" thick. A very stylish trend
of two contrasting handle materials can easily be
accomplished with the double slots for double
guards. Slots are .270" wide and 5/32" thick and
requires 3mm guard and handle pins. and 7/32"
thong hole.
Available sheath KT111.
CAT.# DESCRIPTION
PRICE
Tiger Blade
44.95
tainless Guards & Pins Set
12.95
Traditional Tanto
Gator Bowie
Crocodile Bowie
Combat Bowie
Nanook
Scorpion
Virginia Dagger
Japanese Tanto
Commando Fighter
Tiger
