Introduction
Thank you for purchasing the 1000T pneumatic timed syringe
dispenser. Dispensing systems are supplied tested and are
made using high quality parts to ensure that your time is spent
where it belongs, on productivity. The 1000T will accept most
airline feeds up to 100psi. You can use dispense most fluids
such as solder paste, flux, silicone, RTV, grease, threadlockers
and PVA using barrels and tips supplied in the box. This user
guide will answer most of the more common questions and
help you to maximise the benefits from your new 1000T fluid
dispensing system.
The 1000T is widely used in the electronics industry, aviation,
automotive, food, medical device, aerospace, cosmetics, craft
work, education, chemicals and general industry.
Dispensers can apply a range of deposits from a very small dot
to large volumes - handling watery liquids to thick pastes.
To achieve maximum performance from Adhesive Dispensing
equipment, please read the instructions carefully.
After completing this guide, please do not hesitate to contact
the technical team at Adhesive Dispensing Ltd or contact your
authorised Adhesive Dispensing Ltd reseller.
Tel. 00 44 845 652 0058
Fax. 00 44 845 652 0059
