For further information call Lias Industrial Ltd on +44 (0)1204 594 941
burner Controls
Features ‘Y’ model
• 110 or 230v operation
• For use with Gas or Oil
• Can be used with UV, UV self check,
Ionisation rod, infrared or with 95
and 85 series scanners.
• Complete programmable control
for burner sequencing
• Small footprint
• Choice of wiring bases
• LED and VFD display
• Burner lockout history
• Modbus comms
• Valve proof of closure
• Compatible with YZ300 first out annuciator
BurnerLogix
Features ‘Z’ model
Exactly the same as the Y model but with the added
features of a full boiler control
• Connect up to 3 pressure and temperature probes
• User defined set point for temperature and pressure
• 4-20mA output for modulation control
• Lead and lag for up to 3 boilers
• Thermal shock protection
• Alarms for over temp / pressure / high stack temp
Features YZ300
All boiler or burners interlocks are wired into the
YZ300. This then gives the unit the ability to determine
which individual component caused the unit to lock out.
An example of this could be high gas pressure,
low oil temperature or low water level. All the
interlocks are completely programmable and not all
need to be used. This unit will save engineers hours as
the fault is displayed in clear writing on the
Burnerlogix display.
