wire
2014 show
7-11 April
March 2014
172
➣➢➣
Several machines are in production
throughout the world and many units are
on order.
A single twist strander type ‘ST2000’ will
represent the range of laying-up and
steel wire armouring machines for special,
instrumentation and control cables.
Pourtier France provides high quality
stranders and cablers made in Europe
with the highest standards in design and
manufacturing for the production of all
types of high voltage and extra-high
voltage power cable, from overhead to
insulated, AC type (using high quality
Milliken conductor) or DC type (using
large round compacted conductor or
trapezoidal wires).
Upgrading and services departments will
highlight most recent developments to
maintain and improve production capacity
of existing machinery.
Pourtier – France
Website
:
PS Costruzioni
Stand: 10B21
PS Costruzioni has launched a new model
of its pay-o cantilever and dancer unit.
This new pay-o is very sturdy and can be
used for both insulated and non-insulated
copper cables, while the dancer can
process cables with very small sections,
down to 0.15mm
2
. It also guarantees
a steady control on tension during
the unwinding process (acceleration,
maximum speed and deceleration).
The loading and unloading of the reel
pintles is fast and automatic. The operator
only has to place the reel between the
two pintles and select the reel diameter.
Loading and unloading take place by
means of a steel platform, activated by a
pneumatic cylinder.
This platform has two movements:
•
Vertical: for loading/unloading the
spool, by means of a pneumatic
cylinder
•
Horizontal (sideways): for easily taking
out the reel from the pintles. The
horizontal movements take place on
bearings
PS Costruzioni – Italy
Website
:
PWM
Stand: 09B41
PWM, which celebrates 30 years of service
to the wire and cable industry in 2014,
will exhibit two of its energy-e cient
rod welders. Visitors will be able to watch
demonstrations of cold welding and see
PWM’s proven technology at work.
Designed and built by PWM, the P1000
and the EP500 machines o er wire and
cable manufacturers a fast, cost-e ective
method of welding large non-ferrous rod
sections 5mm to 20mm (0.197" to 0.790")
in diameter. Both models are energy
e cient, low maintenance, and extremely
simple to operate.
The P1000 hydraulic rod welder o ers
wire and cable manufacturers a host of
time-saving design features, packed into a
compact frame.
Power consumption is minimal and the
P1000 requires no heat, ux or llers, so is
clean, easy and safe to operate.
The sloping mechanical parts give the
operator a clear view of the cold weld
process, while quick release dies and an
easily adjustable die setting mechanism
ensure that die changeover is fast and
problem-free.
The P1000 has a wide capacity of 6mm to
16mm (0.236" to 0.63") copper and 6mm
to 20mm (0.236" to 0.79") aluminium.
▲
Single twist strander from Pourtier
▲
Newmodel from PS Costruzioni
▲
Proven technology from PWM
