Micromeritics:
3 Flex 3500
Multi sample High Resolution Micropore
The all-new 3Flex was engineered down to the smallest detail to improve sample throughput, stabi-
lize temperatures, reduce outgassing and most important increase the resolution and range of your
micropore isotherms. With three configurable analysis ports for high throughput 3Flex can operate
two or three micropore ports to meet current or future needs.
Standard mesopore, micropore, or physisorption ready
instrument (Nitrogen or Krypton BET SSA), 5 gas ports
Pneumatically actuated, hard seal valves provide ultra-
clean, leak-free operation
Stainless steel gas inlets, VCR fittings, and analysis
manifold
Interactive Micro Active Software for data analysis with user-
defined report options
Advanced instrument diagnostics
Small footprint conserves valuable lab space
Particular Sciences Ltd
Page 19
Micromeritics:
ASAP 2020 Chemi
Chemisorption
Micromeritics offer several gas adsorption systems designed for catalysis research, for working with
reactive or corrosive gases and for chemical rather than physical assessment of surfaces.
The starting point is their
Flowsorb
systems with manual controls and TPD options shown right.
The ASAP range has a full
2020 Chemi
package to work with
flowing gases over reactive samples, with temperature control,
inlets, gas switching, corrosion resistance, heated manifolds and
gas lines. Detectors are provided to allow analysis with
condensable vapours. Sample preparation occurs in situ to
prevent contamination prior to analysis. Samples can be
prepared at high temperatures (up to 1100 C) and at low
pressures (<10
-5
mmHg).
A benefit of using ASAP 2020 as your platform is the modularity
of the system. With the correct 2020 versions, it is easy to move
between BET, Isotherm, Micropore and Chemi work.
