• Quick Heat up to 120 Degrees 130 seconds
• Use all dual temp glue sticks
• Interchangeable Nozzle
• 180-210 C to heat glue
• 12 g/min output of glue
STHT6-70416
X
5 3253566704166
• Ceramic Heater Fast Warm up – heats up in 60sec vs. current GR100140sec remains the same
wattage even during pumping glue b/c of Ceramic Heater
• High Glue Output – 2.5-3.3 lbs/per hr vs. current GR100 1.67 lbs/per hr
• Stand By Mode: 30 seconds to go back to working temperature (190°C)
• Hibernate Mode: After 30 minutes without pulling the trigger, the glue gun will stop heating the
heater. Detection of Trigger Pulling: Vibration sensor
• Dual Color LED. Red means the temperature of the heater is lower than 170°C. Green means the
temperature is higher than 170°C & ready to use.
FMHT6-70418
-
5 3253566704180
• Fast Warm up - heats up in 100sec vs. current GR20 360sec
• Remains the same wattage even while pumping the glue
• Ceramic Heater - Heats Faster and Holds Heat Longer
• High Glue Output -1.8 lbs/per hr After it reaches working temperature, pump the glue gun for 3
minutes then times 20 to get hourly pumping rate.
• Mechanical thermostat / temperature fuse b/c of high heat output
• DIY & PRO
STHT6-70417
X
5 3253566704173
stanleytools.eu
244
GLUE GUNS
GR90R STANLEY
®
CORD FREE STANDARD GLUE GUN
GR50 STANLEY
®
FAST WARMUP GLUE GUN
GR100R FATMAX
®
HIGH OUTPUT PRO GLUEGUN
