2018_Taurus_Owners-Manual

Wheels and Tires

What to do after the Tire has been Sealed After using the kit to seal your tire, you will need to replace the sealant canister and clear tube (hose). You can obtain and replace sealing compound and spare parts at an authorized Ford dealer or tire dealer. Empty sealant bottlesmay be disposed of at home. However, liquid residue from the sealing compound should be disposed by your local authorized Ford dealer or tire dealer, or in accordance with local waste disposal regulations. Note: After the sealing compound has been used, themaximumvehicle speed is 50mph (80 km/h) and the maximum driving distance is 120mi (200 km). The sealed tire should be inspected immediately. Note: After sealant use, the tire pressure monitoring system sensor and valve stem on the wheel must be replaced by an authorized Ford dealer. You can check the tire pressure any time within the 120 mi (200 km) by performing the procedure from Second stage: Checking tire pressure listed previously. Removal of the sealant canister from the kit

2. Unhook the black hose from the side of the compressor and fasten firmly on the valve stem by turning clockwise. 3. Push and turn the dial clockwise to the air position. Turn on the kit by pressing the on button.

E144622 4. Adjust the tire to the recommended inflation pressure from the tire label located on the driver's door or door jamb area. The tire pressure has to be checked with the compressor in the OFF position to get the correct tire pressure reading. 5. Turn the compressor off by pressing the on/off button. 6. When the tire pressure readingwith the compressor in the off position is correct, disconnect the hose, re-install the valve cap on the tire valve, unplug the compressor, and return the kit to the stowage area.

E144623 1. Unwrap the clear tube from the compressor housing.

272

Taurus(CPH)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201708,FirstPrinting