2018_Taurus_Owners-Manual

Wheels and Tires

WARNINGS Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. Always use the jack provided as original equipment with your vehicle. If using a jack other than the one provided, make sure the jack capacity is adequate for the vehicle weight, including any vehicle cargo or modifications. If you are unsure if the jack capacity is adequate, contact the authorized dealer. Note: Passengers should not remain in your vehicle when the vehicle is being jacked. Note: Jack at the specified locations to avoid damage to the vehicle. 1. Park on a level surface, set the parking brake and activate the hazard flashers. 2. Place the transmission in park (P) and turn the engine off.

E211099 4. Lift the trunk cargo cover and remove thewing nut that secures the spare tire by turning it counterclockwise. 5. Lift and remove the spare tire from the trunk. 6. Remove the second wing nut that secures the jack retention bracket by turning it counterclockwise, then remove the jack kit from your vehicle. 7. Remove the jack and the wrench from the felt bag. Fold down the wrench socket used to loosen the lug nuts and to operate the jack. 8. Loosen each wheel lug nut one-half turn counterclockwise, but do not remove them until the wheel is raised off the ground.

E142551 3. Block the diagonally opposite wheel.

294

Taurus(CPH)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201708,FirstPrinting