7100LL1BPK 10cc Black Barrel Adhesive Dispensing TDS
7100LL1BPK Syringe Barrel Black 10cc Size
Part 7100LL1BPK is a 10cc/ml size Black syringe barrel with luer lock to accept any needle tip, tapered tip or flexible tip. Use this barrel with an air powered dispenser or syringe gun. Wide flanges for secure attachment to an air adapter assembly. Safe for use to 100 psi and certified silicone free. Use with our wiper pistons or flat walled pistons for high performance without dripping or oozing of liquids. Black UV block filter for use with UV cure adhesives.
7100LL1BPK or 910-B
Male Luer Lock
Barrels are also available pre-filled with any adhesive, paste, liquid of your specification. We can provide these syringes in sealed packs with no air entrapment. We also offer syringe filling systems for your own air-free transfer from cartridges.
7100LL1BPK syringe barrels are supplied in packs of 30 or bulk packs of 1000.
Health & Safety in Use
Overall Length (A) Outside Diameter (B) Inside Diameter (C) Flange Length (D)
3.58” (90.93mm) 0.72” (18.36mm) 0.62” (15.72mm) 1.34” (34.04mm) 0.89” (22.60mm)
Barrels are safe and hygienic, reducing risk of operator contact with the materials being dispensed. This syringe fits comfortably in the hand to minimise the risk of repetitive strain injury. For high volume dispensing, we recommend our TS250 or TS350 pneumatic syringe systems.
Flange Width (E)
Wall Thickness (F)
Safe for use to 100psi
7100009WPK 7100006RPK 710000CRPK 71003RHB 71006RHB 7100LL1NPK 7100LL1DPK
10cc Wiper Piston 10cc Flat Wall Piston 10cc End Cap Seals 10cc Adapter 3ft Hose 10cc Adapter 6ft Hose 10cc Clear Barrels 10cc Amber Barrels 10cc Syringe Gun Syringe Filling Station
Silicone Free Plastic
Black plastic for UV cure adhesives
Luer lock tip attachment
Many components are available to order from stock including syringe barrels, pistons, air adapters, caps, needle tips, nozzles, cartridges, mixer nozzles, luer bottles. We also stock manual and air powered dispensers, robots and metering valves. Please contact us if you require application assistance or samples.
The data, information and values contained in this Technical Data Sheet have been obtained by specific tests conducted in a controlled environment, and should be used for guidance purposes only. Although we believe them to be reliable and accurate, users should always conduct their own tests in their specific working conditions to ensure that the product is suitable and effective for use. It is the user’s sole responsibility to determine the suitability of the product for the application. Adhesive Dispensing Ltd cannot be held responsible for the results of procedures undertaken elsewhere, nor for the safeguarding of personnel or property, all of which is the duty of the user. Suitability of products or methods is discretionary. Therefore, warrantees or implied usage obligations should not be attributed to, and are not the responsibility of, Adhesive Dispensing Ltd. Adhesive Dispensing Ltd are not liable for any financial loss or other damages incurred by the user as a result of the use of this product. Product dimensions and design are approximate and could be subject to change, without notice.
Adhesive Dispensing Ltd Sales & Service Freephone 0800 094 9058
Willow House 20 Craigmore Ave Milton Keynes, MK3 6HD United Kingdom
Tel +44 (0) 845 652 0058 Fax +44 (0) 845 652 0059
Registered in England & Wales Reg. No 6048283 VAT No. 901 8594 21
Made with FlippingBook - Online catalogs