2017-Focus-Owners Manual

Security

Programming a Spare Intelligent Access Key You must have two previously programmed coded keys and the new unprogrammed key readily accessible. Contact an authorized dealer to have the spare key programmed if two previously programmed keys are not available. Make sure that the ignition is switched off beforebeginning this procedure. Make sure that you close all the doors before beginning and that they remain closed throughout the procedure. Carry out all steps within 30 seconds of starting the sequence. Stop and wait for at least one minute before starting again if you carry out any steps out of sequence. Note: You can programamaximumof eight intelligent access keys to your vehicle. Read and understand the entire procedure before you begin.

1. Insert the first previously programmed coded key into the ignition. 2. Switch the ignition fromoff to on. Keep the ignition on for at least 3 seconds, but no more than 10 seconds. 3. Switch the ignition off and remove the first coded key from the ignition. 4. After at least 3 seconds but within 10 seconds of switching the ignition off, insert the second previously coded key into the ignition. 5. Switch the ignition fromoff to on. Keep the ignition on for at least 3 seconds, but no more than 10 seconds. 6. Switch the ignition off and remove the second previously programmed coded key from the ignition. 7. After at least 3 seconds but within 10 seconds of switching the ignition off and removing the previously programmed coded key, insert the new unprogrammed key into the ignition. 8. Switch the ignition fromoff to on. Keep the ignition on for at least six seconds. 9. Remove the newly programmed coded key from the ignition. If you have successfully programmed the coded key, it will start your vehicle and operate the remote entry system. If programming was unsuccessful, wait 10 seconds and repeat Steps 1 through 8. If programming remains unsuccessful, have your vehicle checked by an authorized dealer. Wait 20 seconds and repeat Steps 1 through 9 to program an additional key.

1

2

E184385

1. Open the floor console storage compartment lid. 2. Remove the tray.

68

Focus(CDH)Canada/UnitedStatesofAmerica,HM5J 19A321AAenUSA,Editiondate:201608,FirstPrinting