CanadianConnectors (CA05041E )

Suspension Clamps— Ductile Iron Clamp For ground wire application with galvanized steel cable with or without armor rods.

DUCTILE IRON MS

Type MS may also be used to suspend copper or Copperweld ® cable. Magnetic induction heating will occur.

Material: Body and Keeper – galvanized ductile iron Hardware – galvanized steel Cotter Pin – stainless steel Socket – galvanized forged steel

W

7 / 8

” 5 / 8

”

5 / 8

"

2 1 / 2

”

2 1 / 16

”

H

30°

Clevis Type CA

Socket Type SA

L

1 / 2

” U-Bolt Dia

Suspension clamps containing the ‘CVN’ suffix will come supplied with a Charpy Level 1 rated (20 Joules at -20 degrees C) load bearing clevis bolt and hardware galvanized per CSA G164.

Clamp Recommendations for Galvanized Overhead Ground Wire

Bare Conductor

Formed Armor Rods

Steel Cable Size

Clamp Cat No

Diameter Inches (mm)

Clamp Cat No

Diameter Inches (mm)

MS46 MS46 MS46 MS46 MS60 MS70

.240 (6.10) .312 (7.92) .360 (9.14) .435 (11.05) .495 (12.57) .621 (15.77)

MS46 MS60 MS60 MS82 MS82 —

.412 (10.46) .512 (13.00) .560 (14.22) .673 (17.09) .771 (19.58) —

1/4”-7 str 5/16”-7 str 3/8”-7 str 7/16”-7 str 1/2”-7 str 5/8”-7 str

Product Data

Approx Wt Each lb (kg)

Fitting

Dimensions Inches (mm)

Catalog Number

Clamping Range Inches (mm)

Ultimate Body Strength lb (kN)

Type

Cat No

L

H

W

MS46NBNKCVN MS46SBNKCVN

None Socket

— SA04CVN

.20-.46 (5.08-11.68)

16,000 (71)

55/8 (142.88)

2 (50.8)

7/8 (22.2)

2.15 (.98) 3.4 (1.54)

MS60NBNKCVN MS60SBNKCVN

None Socket

— SA04CVN

.20-.60 (5.08-15.24)

16,000 (71)

67/16 (163.51)

2 (50.8)

7/8 (22.2)

2.65 (1.20) 3.9 (1.77)

MS70NBNKCVN MS70SBNKCVN

None Socket

— SA05CVN

.30-.70 (7.62-17.78)

18,000 (80)

63/8 (161.93)

2 (50.8)

15/16 (23.8)

2.90 (1.32) 4.2 (1.91)

MS82NBNKCVN MS82SBNKCVN

None Socket

— SA06CVN

.40-.82 (10.16-20.83)

18,000 (80)

71/2 (190.50)

23/8 (60.33)

15/16 (23.8)

3.25 (1.47) 4.7 (2.13)

.50-1.04 (12.70-26.42)

25,000 (111)

8 (203.2)

23/4 (69.9)

11/8 (28.6)

MS104NBNKCVN

None

—

5.70 (2.59)

NOTE: Recommended torque on U-bolts: 1/2” — 480 in-lb. Bolt and nut may be substituted for clevis pin by adding suffix "BNK" to catalog number

©2017 Hubbell Incorporated | hubbellpowersystems.com

B-10