wiredinUSA March 2015

MEET US AT INTERWIRE... Atlanta, GA, USA

(6.5") and 360mm (14") in overall diameter. It can be run both in line applications and offline applications. Full line integration can include an automatic palletizer, film unit, pallet conveyor, reel labeller, test equipment and meter marking on the cable.

Existing technology to be featured includes ODAC ® laser scanning diameter gauges with new three-axis models for diameters down to 0.0024" (0.06mm); DVO 2 and DVW 1 oscillating devices for ODAC ® gauges; MSD diameter and ovality gauges with novel linear sensor technology; ODEX ® non-contact diameter and eccentricity system; CAPAC ® for in-line dielectric testing and FFT/SRL analysis; Wallmaster in-line ultrasonic wall thickness and concentricity systems; Rayex ® for diameter, wall thickness and concentricity for CV power cable applications; WST and AUTAC preheating and conductor temperature sensors; and novel AC and DC spark tester solutions.

27 th - 30 th April 2015

...and PICK UP YOUR FREE MAGAZINES and cds

S S The SW6-14 dual head spooler from Windak

The SW6-14 loads and unloads the spools automatically. The cut ends are secured with stretch wrap. The SW6-14 uses the same reliable catch cut mechanism as the high-speed SW6 spoolers. This provendesign allows for a stop time of approximately one second. The short stop time increase the line output up to 30-40 percent against traditional spoolers. The SW6-14 offers maximum flexibility and high output. Windak Group – Estonia Website: www.windakgroup.com

www.read-eurowire.com

S S The new AC and DC Sparktester generation accurately maintains test voltage under any condition including highest capacitive loads

www.read-wca.com

New developments to be introduced include the modular USYS IPCe line of processors and controllers; Steelmaster Rotation (SMR) for in-line hot and cold rod and bar mills; SIMAC ® 63 for in-line surface faults and defects; KW Trio for lump and neckdown detection for fine dimension applications; and Profilemaster ® PMM 30 for in-line profile measurement of non-round products for fine dimensions. Zumbach Electronic AG – Switzerland Website: www.zumbach.com

Zumbach Electronic AG Booth 1540

Leading magazines

Zumbach will showcase its broad range of dimensional measurement and inspection systems for rod and bar mills, and wire drawing, wire insulatingandcable jacketing processes.

for the wire and cable industries

wiredInUSA - March 2015

wiredInUSA - March 2015

66

67