EoW November 2008

lubricants (dry & wet)

Lubricants with REACH in mind Since its foundation in 1854, Condat has specialised in designing, producing and commercialising special chemical products including industrial lubricants. Condat’s Vicafil ® products are used across the world for wire drawing applications. The Vicafil range covers all the industrial needs in the field of rod wire, cold rolling, wire drawing, drawing of bars and tubes as well as cold heading and offers: surface treatments with non-reactive surface coatings and reactive soaps for steel • and stainless steel applications dry lubricants with calcium and sodium soaps • soluble lubricants for all wet drawing applications and a special range for copper • applications oils, greases and pastes for all forming applications • anti-corrosion and protection products • degreasing products and cleaners •

Taking lubricant technology to India Peddington Lubrimetal Pvt Ltd India is a member of Lubrimetal Group, among the largest wire drawing lubricant manufacturers in the world. Peddington Lubrimetal Pvt Ltd India is a leader in India for the production of special wire drawing lubricants (dry and wet), special additives and coatings, pre-drawing carriers, inhibitors, phosphating agents and copper coating additives, including: PL 2000 – PL 9001– PL 1025 New strong dry drawing lubricants for mechanically descaled wire rod during the production of galvanised wire for fences, barbed wire, baling wire and mig wires. PL 52 – PL 3173 and PL 705 High performing dry drawing lubricants for PC wire and strand production. PL 7080 – CS 7070 – PL 3700 High performance sodium-based lubricants for high carbon steel (spring and steel cord) and stainless steel wire drawing. LP 790/5 A high performance oil for stainless steel wire wet drawing. LP 348 – LP 750 – LP 600 – LMZ 10 New emulsifiable oils for wire wet drawing for the production of mig wire, spring, galvanised wires and steel cord. LP 55 – LP 390 – LP 550 Copper wire drawing oils for break- down and multi-wire machines. Steel for ITS 2 – ITS 3-7030 Non-hygroscopic salts for the pre- drawing preparation of stainless steel and carbon steel wire (batch and in line treatments). Applilub 50 and Applilub 100 New lubricant applicators. Peddington Lubrimetal Pvt Ltd – India Fax : +91 22 2261 0254 Email : info@peddingtonlubrimetal.com Website : www.peddingtonlubrimetal.com

The advantages of the Vicafil range include: reduced waste and soap consumption • in line cleaning • higher speeds • chemical compatibility • stronger adhesion on smooth surfaces • higher drawing capability •

Condat’s pellet formulation of Steelskin® ▲ ▲

In addition, Condat offers special ranges developed for specific needs, such as: Steelskin: among this range of specific soaps, a unique technology called “Pellets” • presents the lubricant as granules which provide a dust free environment in workshops, a low soap consumption during drawing and a consistent lubricant supply in the die cone Extrugliss • : a special range for cold heading applications Galvasmooth: a range of wiping products for the hot dip galvanising process of • wires Condat offers lubricants that meet the most recent environmental and health & safety legislations: low dust in workshops • european legislations on chemicals • eco-friendly lubricants, free of boron and barium •

Condat AS – France Fax : +33 47807 3885 Email : info@condat.fr Website : www.condat.fr

60

EuroWire – November 2008