Flat 3 Cremer Street Home User Guide

Floor Temperature Sensor Probe Type The neoStat-e is supplied with a 10K floor sensor probe & is compatible with two other common probe values which are 12K or 15K. To change the neoStat-e to use a different probe type, follow these steps ; • Use the Left / Right keys to scroll to ...................................................... • Press and hold Tick to turn the display OFF ......................................................... • Press and hold the Up and Down keys together for 5 seconds ................ • Use the Left / Right keys to scroll between the different probe values ...... The neoStat is configured as default for compatibility with 10K sensor probes. The thermostat is also compatiblewith two other common probe values which are 12K or 15K. T c ange the neoStat to use a different probe type, follow these steps; . , ; ...................................................... ......................................................... ................ ...... Floor Te erat re Se sor ro e Ty e neoStat-e is supplied with a 10K floor sensor probe & i co pati le with two other co on probe values which are 12K or 15K. o change the neoStat-e to use a different probe type, follow these steps ; • Use the Left / Right keys to scroll to ...................................................... • Press and hold Tick to turn the display OFF ......................................................... • Press and hold the Up and Down keys together for 5 seconds ................ • Use the Left / Right keys to scroll between the different probe values ......

10 = 10K Probe 10 = 10K Probe 10 = 10K Probe

15 = 15K Probe 15 = 15K Probe 15 = 15K Probe

12 = 12K Probe 12 = 12K Probe 12 = 12K Probe

2288 ..................................................................... The neoStat -e ill revert to the ain display configured for the ne probe type. Note: This change should only be carried out by an experienced technician ho has accurately verified the probe value being used. 28 • Press the Tick key to confir selection ..................................................................... The neoStat -e ill revert to the ain display configured for the ne probe type. Note: This change should only be carried out by an experienced technician ho has accurately verified the probe value being used. eoStat will revert to themain display configured for the newprobe type. t :This change shouldonly be carriedout by anexperie c d t chni ianwhohas r tely verified theprobe valueb ingused. • Press the Tick key to confirm selection ..................................................................... The neoStat -e will revert to the main display configured for the new probe type. Note: This change should only be carried out by an experienced technician who has accurately verified the probe value being used. • Press the Tick key t