Flat 3 Cremer Street Home User Guide

en Appliance door

Fitting the door on the appliance 1. Insert the front panel at the bottom into the retainers (figure ! ). 2. Close the front panel until both upper hooks are opposite the opening (figure " ).

4. Open the appliance door again slightly. Put the cover back in place and press on it until it clicks audibly into place (figure # ).

1

2

5. Close the appliance door.

Removing and installing the door panels To facilitate cleaning, you can remove the glass panels from the appliance door. Removing the door from the appliance 1. Open the appliance door slightly. 2. Press on the right and left side of the cover (figure ! ). 3. Remove the cover (figure " ).

3. Press the front panel at the bottom until it clicks audibly into place (figure # ) 4. Open the appliance door again slightly and remove the tea towel. 5. Screw both screws back in on the left and right. 6. Put the cover back in place and press on it until it clicks audibly into place (figure $ ).

1

2

7. Close the appliance door. Caution! Do not use the cooking compartment again until the panels have been correctly fitted.

4. Loosen and remove the screws on the left and right of the appliance door (figure # ). 5. Before closing the door again, trap a tea towel which has been folded several times in the door (figure $ ). Pull out the front panel upwards and lay it on a flat surface with the door handle facing downwards.

Clean the panels with glass cleaner and a soft cloth. : Warning Risk of injury! ■ Scratched glass in the appliance door may develop into a crack. Do not use a glass scraper, sharp or abrasive cleaning aids or detergents. Risk of injury! ■ The hinges on the appliance door move when opening and closing the door, and you may be trapped. Keep your hands away from the hinges.

20