Flat 3 Cremer Street Home User Guide

Water softening system/Special salt

en

5. Hold down P > button and press h START button until the ` Dry indicator and )* Salt refill indicator flash. 6. Release the buttons. The )* Salt refill indicator ` Dry indicator flash.The # indicator lights up (= level 1). To change the setting: 1. Press H < button until the required level has been selected. 2. Press h Start button.

Setting

The amount of salt dispensed can be set to 4 levels, depending on the hardness of your water. 0, 1, 2 or 3 displays light up (see table) according to your selection. Factory setting: 1. 1. Determine the hardness of your tap water. Your water utility can help you here. 2. The required setting can be found in the following water hardness table. 3. Open the door. 4. Switch on ( ON/OFF switch.

The ` and )* indicators go out.The level selected is saved.

3. Close the door.

Water hardness table

ƒ &ODUNH

+DUGQHVV UDQJH

PPRO O

$

%

&

6HWWLQJ

VRIW

PHGLXP

KDUG KDUG

11