Bits September 2015 WEB

Rear Bush Installer – VAG 59.95 LAS4188 • This tool is essential for replacing the bonded rubber plastic rear axle mounting bushes fitted to VAG vehicles, without removing the rear axle assembly from the vehicle • It’s thrust bearing allows the bush to be fitted quickly and easily without causing damage • The drive screw and nut should be lubricated before and after every use • Applications: Primarily for use with Audi A3, Volkswagen Golf IV, Bora 1.4 1.6 1.8 2.0 and 1.9D (01-03) Suspension Bush Remover/Installer – VAG 119.95 LAS4748 • This bush removal tool is designed for the rear bush on the front wishbone (Console bush) • Applications: Volkswagen Polo, Fox, Seat Cordoba, Seat Cordoba, Skoda Fabia - All 02-07 Seat Ibiza 02 onwards after Chassis 6K-2-000 001)

Rear Suspension Upper Bush Tool £69.95 LAS5978 • Application: Range Rover L322 2003-2012, Discovery 3/4, Range Rover Sport • The Lower Hub Bush Tool (LAS5077) and the Upper Hub Bush Tool (LAS5978) have been developed to allow the technician to remove and refit these rear suspension bushes with the minimum of dismantling required.

Rear Suspension Lower Hub Bush Tool £89.95 LAS5977

• Being able to perform the task on the vehicle saves considerable time over the more traditional use of a workshop press and the requirement that the hub be completely removed.

Over 190 Branches Nationwide 0845 603 3636

23