Alfa Tools General Product Catalog

Rebar Cutters

Carbide Tipped, 1/2" Straight Shank

Features:

• Allows user to drill through concrete-embedded rebar • Eliminates need to relocate holes. • Prevents breaking or shattering of hammer bits • Use in 1/2" capacity or larger drill motor with a three jaw chuck and no load speed of 440 RPM

For Rotary Use Only

ONE PIECE CUTTER

TWO PIECE CUTTER

ONE PIECE CUTTER

SIZE

SUGGESTED

STOCK #

1. When you encounter a rebar, STOP DRILLING! The sound of a rotary hammer drill bit hitting steel is very audible compared to cutting concrete Remove the drill bit from the hole 2. Mount a rebar cutter of the same diameter as the hole in either a standard 1/2" drill motor or a 1/2" rotary percussion drill with the selector in the “rotary only” position Insert the rebar cutter into the hole and begin drilling at the suggested RPM speed only Do Not Use Excessive Speed on the Machine This will either damage or break the rebar cutter 3. Once rebar is cut through, remove the rebar cutter from the hole and continue drilling with a rotary hammer drill bit

R.P.M.

DIA.

OAL

8" 12" 12" 12" 18" 12" 12" 18" 12"

850-1200 850-1200 850-1200 750-1000 750-1000 750-1000 600-850 600-850 600-850

RBC101 RBC102 RBC103 RBC104 RBC105 RBC106 RBC107 RBC108 RBC109

3/8" 1/2"

9/16"

5/8" 5/8"

11/16"

3/4" 3/4"

13/16"

1 per pack

One-piece system shanks cannot be removed

Rebar Cutters

TWO PIECE CUTTER

SIZE

SUGGESTED

CAUTION: Rebar cutters are problem solvers They should not be used for drilling concrete

STOCK #

R.P.M.

DIA.

OAL

12" 12" 12" 12" 12" 12" 12" 12" 12"

600-850 500-750 500-750 450-600 450-600 350-500 350-500 350-500 350-500

RBC110 RBC111 RBC112 RBC113 RBC114 RBC115 RBC116 RBC117 RBC118

7/8"

1"

1- 1/8" 1- 1/4" 1- 3/8" 1-1/2" 1- 3/4"

Rebar Step 1 Hammer Drill

Rebar Step 2

Rebar Step 3 Hammer Drill

Rebar Drill

F

2"

2-1/2"

1 per pack

Two-piece system shanks may be combined to achieve a length of 12" Shanks for 7/8" - 1-3/4" have 1/2" - 13 thread Shanks for 2" - 2-1/2" have 3/4" - 10 thread

F-11