wiredInUSA September 2018

Suitable for core wires, guide wires, stylets and mandrels, these non-flaking coated wire products can be cut to length from 6 inches to 20 feet and straightened. Supplied in volumes of millions of feet per year, Applied Plastics’ PTFE Natural coated extrusion wire and forming mandrels exhibit 0.05 coefficient of friction when tested in accordance with ASTM-1894. A proprietary process enhances the bonding surface and prevents flaking, and is suitable for stainless steel, Nitinol, platinum and silver plated copper core wire. Pass-through solution With its new KEL-BES-S 32, icotek is offering a new size of its split brush plates for routing cables.

dependable signal density and reduced cable width, while being able to withstand exposure to harsh environments, mechanical stress and excessive temperatures (-65° to 260°C). Cicoil’s patented extrusion process allows individually encased, finely stranded bare copper wires to be placed in a very small flat profile, precisely controlling the spacing of each component and the overall cable shape. At approximately half the size of standard 28 AWG IDC ribbon cables, the new 30 AWG Flexx-Sil rubber jacketed cables are available with up to 64 conductors. Fully terminated assemblies are offered in 3, 6, and 12 foot lengths. Get a coat Applied Plastics Co Inc has introduced the custom manufacture of tight-tolerance Teflon ® coated wire, cut and straightened in-house. Applied Plastics’ PTFE Natural ® coated extrusion wire and forming mandrels are custom manufactured in 0.001 inch to 0.07 inch diameter sizes with final diameter tolerances of ±0.0001 to ±0.0005 inch, depending upon diameter. The cables are completely compatible with any insulation displacement connectors.

icotek’s KEL-BES-S 32 is suitable for round holes with a diameter of 32mm.

The cable pass-through is snapped directly into the cut-out, or can be screw fitted with an included locknut. The divisibility of the system allows for subsequent assembly, where the frame is installed around the wires. It is not necessary to disconnect the cables.

The brush seals are suitable for shielding against dust and drafts, providing edge

43

wiredInUSA - September 2018