Wagner 2021 Catalog
Bronze Handrail Mouldings
Please Note: Due to differences in tolerances between handrail extrusions and the cast terminals, joints usually require special finishing to assure an acceptable match.
The ICC, 2010 ADASAD and ANSI A117.1 use the following definition for non-circular handrails: 505.7.2 Non-Circular Cross Sections: Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4” (100 mm) minimum and 6 1/4” (160 mm) maximum, and a cross-section dimension of 2 1/4” (57 mm) maximum. Many Wagner handrail sections meet this definition but you should confirm selections with your local code officials prior to specifying.
Handrail • C38500, extruded architectural bronze • 20’ random lengths
2 1 / 4 " 1 5 / 16 " 1 9 / 16 "
2 1 / 4 " 1 9 / 16 "
H5853
H5816
Description
Type
Malleable Iron
Mill Finish Bronze
Satin Finish Bronze
Polished Finish Bronze
H5853
H5853.4
H5853.7
Handrail: 3.060 lb/ft
Extruded Extruded
H5816*
H5816.4*
Handrail: 2.100 lb/ft
H5853AL
Senior Lateral Scroll Left
Cast Cast Cast Cast Cast Cast Cast
H5853AR
Senior Lateral Scroll Right
H1150BL•
H5150BL
Senior Lateral Channel Left
H1150BR•
H5150BR
Senior Lateral Channel Right
H5853G H5853K H5853KK
Volute
Corner Bend
H1150KK•
Channel Corner Bend
C5120512 †
C5120512.4 † C5150512.4 †
1 1/4" Channel, Sharp Corners 1 1/2" Channel, Sharp Corners
Extruded Extruded
C1150512•
C5150512.7 †
Channel
a
t
b
C1120512
Sharp Corners Mill Finish Bronze
Sharp Corners Satin Finish Bronze
Sharp Corners Polished Finish Bronze
b
a
t
Mill Finish Steel Hot Rolled Sharp Corners Mill Finish Aluminum
C1100512 C1120512 C1150512
C2100512 C2120512 C2150512
C5100512 † C5120512 †
C5100512.4 † C5120512.4 † C5150512.4 †
1"
1/2"
1/8" 1/8" 1/8"
1 1/4" 1/2" 1 1/2" 1/2"
C5150512-16 †
C5150512.7 †
* Not suitable for bending † Denotes 16’ lengths • Steel/malleable iron
P 414-214-0444 T 888-243-6914
ISO 9001:2015 F 414-214-0450
194
Made with FlippingBook flipbook maker