EoW March 2009

english corporate news

Niehoff and Niehoff in Russia

Bulk handling

Skako Comessa develops, produces and sells vibratory feeders and conveyors to activate, transport and separate all kind of bulk solids. The Skako Comessa storage feeder, type FV, is used particularly for continuous and weight-specific charging of materials for: • Hardening and annealing furnaces • Preparation machines • Packaging machines • Electro-plating machines • Melting furnaces • Machines for quality control Skako Comessa manufactures systems for automatic and weight guaranteed furnace feeding, suited to: • Feeding of belt, annealing and tempering furnaces • Discharge of industrial washing and drying machines • Feeding and discharge of electroplating and surface treatment lines Controlled, automatic and weight guaranteed bulk material feeding ensures consistent product quality, efficiency of the downstream equipment, and reproducible and traceable production parameters. Skako Comessa A/S – Ukraine Fax : +38 057 762 7012 Email : and@skakocomessa.com.ua Website : www.skakocomessa.com.ua • Separating plants • Washing machines

MMH101 multi-wire drawing machine ▲ ▲

The 16-carrier lever arm high speed braiding machine type BMV16 can process bare or plated copper wire, aluminium wire and stainless steel wire with a single-wire diameter of 0.05mm to 0.3mm, as well as artificial yarn and fibres. Among the features of the BMV series, designed for 12 or 24 spools, are an infinitely variable electronic control of the line speed and the braiding pitch, an automatic central lubrication and – optionally – an automatic low bobbin detection device which automatically stops the machine before a braiding bobbin is completely empty. Maschinenfabrik Niehoff GmbH & Co KG – Germany Fax : +49 9122 977 155 Email : info@niehoff.de Website : www.niehoff.de Maschinenfabrik Niehoff GmbH & Co KG in the Russian Federation Fax : +7 499 929 5539

At wire Russia, Maschinenfabrik Niehoff and Niehoff of Russia will show the following equipment: drawing machine is designed to manufacture simultaneously up to 16 wires with highly uniform properties. It can work with a maximum speed of 31.5m/s. The maximum inlet diameter for soft copper wire is 1.8mm and the finish diameter range is from 0.1mm–0.4mm. The machine is part of the MMH range of multi-wire drawing machines, capable of drawing up to 42 wires. twist-bunching machine is designed for bunches with a cross section of 0.09mm² to 6mm² and accommodates spools with a maximum flange diameter of 630mm. The lay length can be freely adjusted from 6mm to 100mm, with a maximum of 6,500 twists per minute. The D631 is part of a series of six models that cover the cross sections from 0.013mm² to 50mm². The MMH101 multi-wire The D631 double

31

EuroWire – March 2009